sudomod

Posted: **Thu Apr 13, 2017 6:04 am**

Hello, i've buyed this screen from Aliexpress.
How can convert it to 5v?
How can fit into DMG-01 Case? What part i can cut?

Please Help!

Posted: **Mon Apr 17, 2017 9:30 am**

You need to desolder few parts and convert driver to 5v only:

here is how my mod :

Maybe you can remove entire button part to save more space but haven't tested this and you will loose ability to adjust contrast/brightness.

Posted: **Wed Apr 19, 2017 11:52 pm**

Very thanks. I love you.

Posted: **Thu Apr 27, 2017 9:01 am**

I do not see the image well, the white wire is soldered?
where ?

thanks for everything

Posted: **Thu Apr 27, 2017 10:58 am**

in my image white is unsoldered, but you can leave it soldered to AV2 or completely remove and use just 3 wires

Posted: **Thu Apr 27, 2017 11:30 am**

Ok. I test It. Thank you

Posted: **Sat Apr 29, 2017 3:33 pm**

hi all, i have this same pcb, but also with your images, i have this problem:

[youtube]https://www.youtube.com/watch?v=f4vAgs4lINo[/youtube]

Why?

Posted: **Thu May 04, 2017 9:48 am**

To reduce the pcb, can i cut in this way without error?

Posted: **Tue Aug 22, 2017 11:11 pm**

Thank you so much!

Display! How to fit? How can convert to 5v?