Page 1 of 3
Going mad cartridge wiring
Posted: Sun Jun 05, 2016 10:46 am
by CicciOPiK
Hi guys i'seriously going mad, don't know what i'm doing wrong, here some pic... Hope you can help me... Don't know why it doesn't function. Gnd not connected is number 3. @wermy... Ur help is needed
Re: Going mad cartridge wiring
Posted: Sun Jun 05, 2016 11:04 am
by CicciOPiK
When i start it up with connected cartridge no signs of life, when i power on with SD in original socket gives me this...
Re: Going mad cartridge wiring
Posted: Sun Jun 05, 2016 1:04 pm
by wermy
Weird... did you try re-flashing your card? I got some read errors off and on when I wired mine up but that was fixed when I added some shielding, and it always worked when I put the card in the original SD card reader.
Re: Going mad cartridge wiring
Posted: Sun Jun 05, 2016 2:33 pm
by DirtyBullets
i had similar problems before but turned out some of the tracers was using the same as other pins, check to make sure you have no short.
Re: Going mad cartridge wiring
Posted: Sun Jun 05, 2016 3:41 pm
by CicciOPiK
wermy wrote:Weird... did you try re-flashing your card? I got some read errors off and on when I wired mine up but that was fixed when I added some shielding, and it always worked when I put the card in the original SD card reader.
Probably the error is for rude shutdowns cause i'm Tryin and probably i damaged some files.... For connections do u think i did it right? Giving a look to photos i mean...
Re: Going mad cartridge wiring
Posted: Sun Jun 05, 2016 4:58 pm
by DirtyBullets
need to see the reverse side to be able to check to make sure its not going anywhere else. have a look at my project and see how i did it...
http://www.sudomod.com/forum/viewtopic.php?f=9&t=236
Re: Going mad cartridge wiring
Posted: Mon Jun 06, 2016 8:23 am
by CicciOPiK
@wermy is possibile that i've done wrong connections into the CART pcb... Can u give a rapid look at the photos?
Re: Going mad cartridge wiring
Posted: Mon Jun 06, 2016 8:41 am
by wermy
CicciOPiK wrote:@wermy is possibile that i've done wrong connections into the CART pcb... Can u give a rapid look at the photos?
Can you post a picture of the other side of your SD card?
Re: Going mad cartridge wiring
Posted: Mon Jun 06, 2016 8:48 am
by CicciOPiK
wermy wrote:CicciOPiK wrote:@wermy is possibile that i've done wrong connections into the CART pcb... Can u give a rapid look at the photos?
Can you post a picture of the other side of your SD card?
Here it is, ty
Re: Going mad cartridge wiring
Posted: Mon Jun 06, 2016 8:51 am
by wermy
CicciOPiK wrote:wermy wrote:CicciOPiK wrote:@wermy is possibile that i've done wrong connections into the CART pcb... Can u give a rapid look at the photos?
Can you post a picture of the other side of your SD card?
Here it is, ty
Sorry, I meant the underside of the sd card adaptor itself, so I can see which SD card pins go where.