Fury's Gameboy Pocket Pi [in progress]
Fury's Gameboy Pocket Pi [in progress]
So I've decided to basically combine Wermy's guide and http://goo.gl/CMa1Jp guide. I'm planning on putting a 3.5" BW screen in my Gameboy Pocket with the Pi Zero. I might end up putting the Pi in the cartridge, but I haven't decided yet. I know I'm going to need all the internal room I can get, so it might be that I hollow out the cartridge and just use it as a shell/door. We'll see how it goes when I finally get there.
Update 3:
It's been a while since I've posted. I've been toying with Retropie a lot and trying to figure out some good PCB options that don't include scratching traces. Right now I've got the Pi and the screen powered off the battery via the Powerboost and the Power Strip @Helder has up for sale on OSH park. I also wired in the original Pocket power switch directly to the Powerboost (since I haven't built the safe power down yet). Up next is updating the config files and connecting the PMW audio board since I've finished soldering all the components to the board. I should be able to get that done tonight. #MovingRightAlong
[spoiler="pictures"]I'm also planning on adding electrical tape to screen to black out the screen light spill.
[/spoiler]
Update 2:
Finished leveling out the screen. Glued the screen in place. Discovered that the board was too tall/thick to be able to close the case on one side. I brought out the Dremel again to shave off the bits I needed to get the board to fit.
[spoiler="pictures"]
[/spoiler]
Update 1:
I was able to get the 3.5" screen to fit in the Pocket. The screen doesn't currently sit perfectly flat with the front because the front face of the pocket is curved, and the horizon is off a bit. I obviously still need to file down and overall clean up the entire thing, but I wanted to post that it's possible.
[spoiler="pictures"]
Side view with the screen in. You can see that what was once the Contrast and Volume labels is now gone.
[/spoiler]
Update 3:
It's been a while since I've posted. I've been toying with Retropie a lot and trying to figure out some good PCB options that don't include scratching traces. Right now I've got the Pi and the screen powered off the battery via the Powerboost and the Power Strip @Helder has up for sale on OSH park. I also wired in the original Pocket power switch directly to the Powerboost (since I haven't built the safe power down yet). Up next is updating the config files and connecting the PMW audio board since I've finished soldering all the components to the board. I should be able to get that done tonight. #MovingRightAlong
[spoiler="pictures"]I'm also planning on adding electrical tape to screen to black out the screen light spill.
[/spoiler]
Update 2:
Finished leveling out the screen. Glued the screen in place. Discovered that the board was too tall/thick to be able to close the case on one side. I brought out the Dremel again to shave off the bits I needed to get the board to fit.
[spoiler="pictures"]
[/spoiler]
Update 1:
I was able to get the 3.5" screen to fit in the Pocket. The screen doesn't currently sit perfectly flat with the front because the front face of the pocket is curved, and the horizon is off a bit. I obviously still need to file down and overall clean up the entire thing, but I wanted to post that it's possible.
[spoiler="pictures"]
Side view with the screen in. You can see that what was once the Contrast and Volume labels is now gone.
[/spoiler]
Last edited by NyteFury on Fri Sep 02, 2016 4:37 pm, edited 7 times in total.
Gameboy Pocket Zero [in progress]: http://imgur.com/a/L87uk
-
- Posts: 45
- Joined: Sun May 15, 2016 6:21 am
- Has thanked: 50 times
- Been thanked: 7 times
Re: Fury's Gameboy Pocket Pi [in progress]
It's good to see a 3.5 display fits. I may build one in the future.
Re: Fury's Gameboy Pocket Pi [in progress]
I don't think the Adafruit 3.5" screen would work inside the Pocket. I ended up taking the entire display out of the housing to be able to make it possible to fit. Thankful I just had one of the BW screens that are very easy to pop out of the housing.
Gameboy Pocket Zero [in progress]: http://imgur.com/a/L87uk
- ABH
- Posts: 188
- Joined: Sat May 28, 2016 7:01 pm
- Location: Qatar
- Has thanked: 82 times
- Been thanked: 113 times
Re: Fury's Gameboy Pocket Pi [in progress]
Good luck bro
Check out my builds:
GameBoy Pocket RPI3
GameBoy SP
SupaBoy S
BurgerKing Gameboy
GameBoy SP 3A+
Code: Select all
Enjoy your time ..
Re: Fury's Gameboy Pocket Pi [in progress]
Updated!
Gameboy Pocket Zero [in progress]: http://imgur.com/a/L87uk
- JohnnyFYVE
- Posts: 29
- Joined: Wed Sep 28, 2016 11:25 pm
- Location: Ontario, Canada
- Has thanked: 8 times
- Been thanked: 5 times
Re: Fury's Gameboy Pocket Pi [in progress]
Cool. I'm going to try this as well... I'm just waiting for all my parts now. Nice to see somebody else is trying it! Will be checking in with your progress...
- JohnnyFYVE
- Posts: 29
- Joined: Wed Sep 28, 2016 11:25 pm
- Location: Ontario, Canada
- Has thanked: 8 times
- Been thanked: 5 times
Re: Fury's Gameboy Pocket Pi [in progress]
[quote="NyteFury"]So I've decided to basically combine Wermy's guide and http://goo.gl/CMa1Jp guide. I'm planning on putting a 3.5" BW screen in my Gameboy Pocket with the Pi Zero. I might end up putting the Pi in the cartridge, but I haven't decided yet. I know I'm going to need all the internal room I can get, so it might be that I hollow out the cartridge and just use it as a shell/door. We'll see how it goes when I finally get there.
Update 3:
It's been a while since I've posted. I've been toying with Retropie a lot and trying to figure out some good PCB options that don't include scratching traces. Right now I've got the Pi and the screen powered off the battery via the Powerboost and the Power Strip @Helder has up for sale on OSH park. I also wired in the original Pocket power switch directly to the Powerboost (since I haven't built the safe power down yet). Up next is updating the config files and connecting the PMW audio board since I've finished soldering all the components to the board. I should be able to get that done tonight. #MovingRightAlong
[spoiler="pictures"]I'm also planning on adding electrical tape to screen to black out the screen light spill.
[/spoiler]
Me again,
I see you removed the screen from the metal enclosure in order for it to fit. Any tips on doing that before I try?
Thank you,
John D
Update 3:
It's been a while since I've posted. I've been toying with Retropie a lot and trying to figure out some good PCB options that don't include scratching traces. Right now I've got the Pi and the screen powered off the battery via the Powerboost and the Power Strip @Helder has up for sale on OSH park. I also wired in the original Pocket power switch directly to the Powerboost (since I haven't built the safe power down yet). Up next is updating the config files and connecting the PMW audio board since I've finished soldering all the components to the board. I should be able to get that done tonight. #MovingRightAlong
[spoiler="pictures"]I'm also planning on adding electrical tape to screen to black out the screen light spill.
[/spoiler]
Me again,
I see you removed the screen from the metal enclosure in order for it to fit. Any tips on doing that before I try?
Thank you,
John D
Re: Fury's Gameboy Pocket Pi [in progress]
Technically mine wasn't fully enclosed, just partially. Post of picture of your monitor and I'll let you know if it looked like mine.I see you removed the screen from the metal enclosure in order for it to fit. Any tips on doing that before I try?
Gameboy Pocket Zero [in progress]: http://imgur.com/a/L87uk
- JohnnyFYVE
- Posts: 29
- Joined: Wed Sep 28, 2016 11:25 pm
- Location: Ontario, Canada
- Has thanked: 8 times
- Been thanked: 5 times
Re: Fury's Gameboy Pocket Pi [in progress]
I grabbed one that wasn't enclosed in those Back Up Cam cases... here's a pic:NyteFury wrote:
Technically mine wasn't fully enclosed, just partially. Post of picture of your monitor and I'll let you know if it looked like mine.
- Attachments
-
- image.jpg (2.21 MiB) Viewed 13406 times
Re: Fury's Gameboy Pocket Pi [in progress]
Sorry for the delay! I've been super busy with life this past week.
My monitor was a backup camera one and just had a simple plastic and then partially enclosed metal casing for the screen once it was popped out of the main enclosure. I've got another I can pop open and take some pictures.
My monitor was a backup camera one and just had a simple plastic and then partially enclosed metal casing for the screen once it was popped out of the main enclosure. I've got another I can pop open and take some pictures.
Gameboy Pocket Zero [in progress]: http://imgur.com/a/L87uk
Who is online
Users browsing this forum: No registered users and 1 guest