Page 8 of 10
Re: Sota's Game Pi 3 / Raspberry Boy 3 [Raspberry Pi 3 Game Boy] (Completed!)
Posted: Thu Mar 16, 2017 6:45 am
by Valadone
Tok_Tok wrote:Thank you for responding.
I did as you said and it registers the x axis as well as the y axis in the serial monitor. I filled in the numbers i got from there and the stuttering is much less now. But when I test it in windows the cross in the test still won't go to the upper left and lower right corner.. I switched the the wires of the analog stick with A1 and A0 but that didn't help. I know I wired it right because when I control my mouse in windows with it, it works fine. So maybe it's a windows thing, I will try and test it when my housing is finished.
I'm building this if you're interested:
Hello, awesome project !! A day, i found the post where was the 3D design build. Is it you the designer or an other guy ?
If yes, can you share me the URL to see the post
Re: Sota's Game Pi 3 / Raspberry Boy 3 [Raspberry Pi 3 Game Boy] (Completed!)
Posted: Fri May 05, 2017 3:51 pm
by docholiday11x
so i built a very similar build and I'm sorry if i am missing some info that solves this problem.
The build i did is functioning fine, but the little lighting bolt in the corner wont go away. I'm not sure why it is not recieving enough voltage, but the problem has persisted on multiple retropie builds on different sd cards so i know its not the data.
Everything runs fine, i just cant help but wonder if the performance could be better if more power were to be supplied.
(2500 mah adafruit batter with powerboost 1000c also by adafruit)
Re: Sota's Game Pi 3 / Raspberry Boy 3 [Raspberry Pi 3 Game Boy] (Completed!)
Posted: Fri May 05, 2017 4:13 pm
by Hex
@sotasystems Are you able to change the brightness of the screen ?
Re: Sota's Game Pi 3 / Raspberry Boy 3 [Raspberry Pi 3 Game Boy] (Completed!)
Posted: Fri May 05, 2017 4:42 pm
by girbob75
I don't want to get off topic on @sotasystems project. I have taken a lot of inspiration from his/her build.
I think everyone had an interest in this @Tok_tok
Looks like Florian Renner's design concept
http://www.florian-renner.com/game-boy-1up
Re: Sota's Game Pi 3 / Raspberry Boy 3 [Raspberry Pi 3 Game Boy] (Completed!)
Posted: Wed May 31, 2017 10:40 pm
by Fixmylife
Does anyone know how to get this board to run off 5v?
Re: Sota's Game Pi 3 / Raspberry Boy 3 [Raspberry Pi 3 Game Boy] (Completed!)
Posted: Thu Jun 01, 2017 12:06 am
by cobramike
Fixmylife wrote: ↑Wed May 31, 2017 10:40 pm
Does anyone know how to get this board to run off 5v?
First off all this is the wrong threat to post this. But also next time check sudo`s wiki. Here are the links.
http://www.sudomod.com/wiki/index.php?t ... G_0480.JPG
http://www.sudomod.com/wiki/index.php?t ... 8_Mod1.jpg
http://www.sudomod.com/wiki/index.php?title=GBZ_Screen
Greets Mike
Re: Sota's Game Pi 3 / Raspberry Boy 3 [Raspberry Pi 3 Game Boy] (Completed!)
Posted: Thu Jun 01, 2017 12:09 am
by JohnTheKing
Fixmylife wrote: ↑Wed May 31, 2017 10:40 pm
Does anyone know how to get this board to run off 5v?
Variant 8.
http://www.sudomod.com/wiki/index.php?title=GBZ_Screen
Do some searching around my friend. I have been guilty of asking before I look hard for the answer but it is most definitely out there.
Good luck!
Re: Sota's Game Pi 3 / Raspberry Boy 3 [Raspberry Pi 3 Game Boy] (Completed!)
Posted: Thu Jun 15, 2017 3:29 am
by Mikethesith200
sotasystems wrote: ↑Tue Oct 11, 2016 4:44 am
Since I got loads of private messages on this, if you are planning on using a Leonardo Pro Micro for your gameboy build with PSP 1000 analog sticks, feel free to also check out this guide: http://www.sudomod.com/forum/viewtopic.php?f=22&t=1766
For the love of god, how did you desolder the Pi3 that well? I fried mine attempting that.
Re: Sota's Game Pi 3 / Raspberry Boy 3 [Raspberry Pi 3 Game Boy] (Completed!)
Posted: Sun Jun 25, 2017 10:57 pm
by caffeinatedsoap
Anyone know how he split the composite signal? I've looked around online and found a purpose built chip for this
http://www.linear.com/product/LT6206 but that seems rather complex?
Re: Sota's Game Pi 3 / Raspberry Boy 3 [Raspberry Pi 3 Game Boy] (Completed!)
Posted: Tue Aug 01, 2017 3:40 am
by Jaysond04
Hi, Can you please show a a wire diagram of thepower system that shows the power boost tiny chip, arduino chip that does low battery shutdown or the general power system? Like a quick sketch/hand drawn would be so helpful even. I think your power management set up is very smart
Can you elaborate on How your on off mechanism work... Like When pressing the power push button, the pi does a safe shutdown but does your powerboost also shuts down too? Or the powerboost stays on because of that voltage divider 470k and 100k set up which keeps it on but not drain the battery that much??
Thanks
