Full GBZ Build Videos
Full GBZ Build Videos
Hey, what's up guys. I just wanted to let you all know that I'm going to be posting up a video guide from start to finish of my GBZ build. If you have a minute please stop by and take a look it help me out if you see that I am doing something wrong or have any advice as I have never done this before. (Link below)
*PARTS LIST BELOW VIDEO LINKS*
*Update*
PART 7:
https://youtu.be/nNzMJhIqZOQ
PART 6:
https://youtu.be/a1UCWF7-Z6k
PART 5:
https://youtu.be/QHL8gGGsdpM
PART 4:
https://youtu.be/DqNflS1yvnw
PART 3:
https://youtu.be/YA-YQF0xpgg
PART 2:
https://youtu.be/DEw2Pv4OpCQ
PART 1:
https://youtu.be/nO4G2q6mPAQ
INTRO:
https://youtu.be/EGCxwTSxQW0
Thank you very much for all the help,
JPM304
*PARTS LIST*
eBay:
-Gray GameBoy Casing, Seller: game.boy.galaxy.store
-Conductive Rubber Pads, Seller: game.boy.galaxy.store
-Extra Button Set, Seller: game.boy.galaxy.store
-4 Button OPC, Seller: pettagsdirect*com
-2500mmh battery, Seller: oddwires
-DS Lite cartridge slot, Seller: shopoclock-net
-Micro USB, Seller: aquapina
-10k Volume Wheel x5, Seller: 22newcentury
-3.5mm Headphone Jack x5, Seller: kanzezol-store
-6x6x9mm tactile switch X10, Seller: oldeggstore2010
Amazon:
-BW 3.5 Inch TFT LCD
-Raspberry Pi Zero 1.3
-Teensy LC
-SanDisk Ultra 32GB microSDHC
-Targus 4-Port Hub
-Edimax Wi-Fi USB Adapter
-MIATONE Bluetooth 4.0 USB Adapter
-eBoot 120 Pieces Breadboard Jumper Wires Ribbon Cables Kit
Adafruit:
-Mini Metal Speaker w/ Wires - 8 ohm 0.5W[ID:1890]
-JST-PH Battery Extension Cable - 500mm[ID:1131]
-Adafruit Mono 2.5W Class D Audio Amplifier - PAM8302[ID:2130]
-PowerBoost 1000 Charger - Rechargeable 5V Lipo USB Boost @ 1A[ID:2465]
Sudomod market:
-Safe Shutdown Switch (Powerboost Version) V1.2 :Camble
-3D-Printed GBZ Parts - Full Set :Wermy
-Micro SD Cartridge Board :prerunnerseth
retrofresh.uk :
-Screen Cover
-Cartridge Sticker
kitsch-bent.com :
-PWM audio filter
Local Retro Game Store:
-Donor Cartridge
*PARTS LIST BELOW VIDEO LINKS*
*Update*
PART 7:
https://youtu.be/nNzMJhIqZOQ
PART 6:
https://youtu.be/a1UCWF7-Z6k
PART 5:
https://youtu.be/QHL8gGGsdpM
PART 4:
https://youtu.be/DqNflS1yvnw
PART 3:
https://youtu.be/YA-YQF0xpgg
PART 2:
https://youtu.be/DEw2Pv4OpCQ
PART 1:
https://youtu.be/nO4G2q6mPAQ
INTRO:
https://youtu.be/EGCxwTSxQW0
Thank you very much for all the help,
JPM304
*PARTS LIST*
eBay:
-Gray GameBoy Casing, Seller: game.boy.galaxy.store
-Conductive Rubber Pads, Seller: game.boy.galaxy.store
-Extra Button Set, Seller: game.boy.galaxy.store
-4 Button OPC, Seller: pettagsdirect*com
-2500mmh battery, Seller: oddwires
-DS Lite cartridge slot, Seller: shopoclock-net
-Micro USB, Seller: aquapina
-10k Volume Wheel x5, Seller: 22newcentury
-3.5mm Headphone Jack x5, Seller: kanzezol-store
-6x6x9mm tactile switch X10, Seller: oldeggstore2010
Amazon:
-BW 3.5 Inch TFT LCD
-Raspberry Pi Zero 1.3
-Teensy LC
-SanDisk Ultra 32GB microSDHC
-Targus 4-Port Hub
-Edimax Wi-Fi USB Adapter
-MIATONE Bluetooth 4.0 USB Adapter
-eBoot 120 Pieces Breadboard Jumper Wires Ribbon Cables Kit
Adafruit:
-Mini Metal Speaker w/ Wires - 8 ohm 0.5W[ID:1890]
-JST-PH Battery Extension Cable - 500mm[ID:1131]
-Adafruit Mono 2.5W Class D Audio Amplifier - PAM8302[ID:2130]
-PowerBoost 1000 Charger - Rechargeable 5V Lipo USB Boost @ 1A[ID:2465]
Sudomod market:
-Safe Shutdown Switch (Powerboost Version) V1.2 :Camble
-3D-Printed GBZ Parts - Full Set :Wermy
-Micro SD Cartridge Board :prerunnerseth
retrofresh.uk :
-Screen Cover
-Cartridge Sticker
kitsch-bent.com :
-PWM audio filter
Local Retro Game Store:
-Donor Cartridge
Last edited by jpm304 on Wed May 31, 2017 10:25 pm, edited 15 times in total.
Re: Full GBZ Build Videos
Hello, I just wanted to post an update and let you all know that the 1st video in this series will be posted tomorrow. This video will be about putting retropie on the sd card, as well as loading roms to it via USB.
JPM304
JPM304
-
- Posts: 9
- Joined: Sun Oct 23, 2016 2:00 pm
- Has thanked: 2 times
Re: Full GBZ Build Videos
I see you'll be using a teensy too? I will be following this closely then. You will be going step by step with that also?
Re: Full GBZ Build Videos
Nice!
I was thinking about doing a vlog of my on again off again build.
I need to find a week when I have all the parts to put into doing this.
Will follow your progress, good luck!!!
I was thinking about doing a vlog of my on again off again build.
I need to find a week when I have all the parts to put into doing this.
Will follow your progress, good luck!!!
Re: Full GBZ Build Videos
jonathan_g wrote:I see you'll be using a teensy too? I will be following this closely then. You will be going step by step with that also?
Yup, I will be using a teensy and going over step by step on what I did to get mine up and running with the PCB board that I have. I should be uploading that video hopefully this week sometime. It will most likely be in part 3 of my video series. Part 1 just went up moments ago, part 2 I should have up today or tomorrow, and part 3 shortly fallowing that.
Re: Full GBZ Build Videos
You should defiantly give it a try. The more videos that we have out there the better.Tron wrote:Nice!
I was thinking about doing a vlog of my on again off again build.
I need to find a week when I have all the parts to put into doing this.
Will follow your progress, good luck!!!
Thanks for the support.
Re: Full GBZ Build Videos
Hey guy, just wanted to let you all know that part 1 of the build guide has been posted. This video is called "Game Boy Zero Guide Part 1 - How To Install Retropie On Raspberry Pi Zero". In it I show how to install Retropie onto an sd card. As well as how to import ROMs to Retropie via USB stick. Diffidently check it out if that something you might be interested in and don't forget to subscribe for the rest of the Game Boy Zero Build. Link to the video below.
https://youtu.be/nO4G2q6mPAQ
Thanks,
JPM304
https://youtu.be/nO4G2q6mPAQ
Thanks,
JPM304
Re: Full GBZ Build Videos
*Update*
Just uploaded part 2 of my Game Boy Zero build guide. In this video I go over doing the major modifications to the casing of the Game Boy. As well as correcting an issue with some loose buttons after installing the PCB. (Link Below)
https://youtu.be/DEw2Pv4OpCQ
JPM304
Just uploaded part 2 of my Game Boy Zero build guide. In this video I go over doing the major modifications to the casing of the Game Boy. As well as correcting an issue with some loose buttons after installing the PCB. (Link Below)
https://youtu.be/DEw2Pv4OpCQ
JPM304
- rodocop
- Posts: 1723
- Joined: Mon Aug 22, 2016 3:14 pm
- Location: Saskatchewan
- Has thanked: 606 times
- Been thanked: 608 times
Re: Full GBZ Build Videos
Nice videos so far. I've already built two GBZ's but I still like to see what other people have done.
_____________________________________________________
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
Re: Full GBZ Build Videos
Thank you. That would be awesome if you could post a few photos of the ones that you have built. I would definitely like to see what you have done. Possibly get some ideas for mine from them.rodocop wrote:Nice videos so far. I've already built two GBZ's but I still like to see what other people have done.
Who is online
Users browsing this forum: No registered users and 1 guest