Robochris' build #1.
Posted: Wed Apr 19, 2017 5:52 pm
Special thanks to wermy, helder, rxbrad, and everyone else I got advice and inspiration from.
I'll spare you the build list. You've seen it all by now. Lol.
I didn't deviate too much from wermys build or do anything special. I did experiment with a few 3d printed brackets I found on Thingiverse but still ended up using wermys design.
I had to flip the button wells and shim to raise the X/Y button height to my liking. And put the powerboost in the cartridge slot so the leds glow thru.
Variant 8 BW screen and I left out the cartridge reader for simplicity.
I'll spare you the build list. You've seen it all by now. Lol.
I didn't deviate too much from wermys build or do anything special. I did experiment with a few 3d printed brackets I found on Thingiverse but still ended up using wermys design.
I had to flip the button wells and shim to raise the X/Y button height to my liking. And put the powerboost in the cartridge slot so the leds glow thru.
Variant 8 BW screen and I left out the cartridge reader for simplicity.
- IMG_0552.JPG (1.64 MiB) Viewed 4402 times
- IMG_0553.JPG (2.44 MiB) Viewed 4402 times
- IMG_0554.JPG (2.59 MiB) Viewed 4402 times
- IMG_0555.JPG (1.95 MiB) Viewed 4402 times
- IMG_0556.JPG (1.76 MiB) Viewed 4402 times