Pity's #1 Gameboy Pi3
Pity's #1 Gameboy Pi3
Hello sudomoders,
First I want to thank all the members of this forum for their contributions because without them it would have been impossible to carry out this project.
I decided to use a raspberry pi3 I had at home, but I assure you that in future projects I will use a Gameboy zero , it is very difficult for a beginner to put a raspberry Pi 3 inside a Gameboy.
I spent hours reading and seeing images of gameboy constructions, I liked banjokazooie projects, especially their order and cleaning, so mine is quite similar in distribution of components.
In my construction, all components are screwed, can be disassembled if needed, I have used very little Hot glue.
If anyone wants the list of components I put it here, but are "typical".
After a few weeks of hard work, I finally have my gameboy finished.
Mod case:
Amazon screen rear camera modified to 5V and hoolyloo's bracket with epoxy to case
Buttons connected via FPC to arcade USB decoder:
First I want to thank all the members of this forum for their contributions because without them it would have been impossible to carry out this project.
I decided to use a raspberry pi3 I had at home, but I assure you that in future projects I will use a Gameboy zero , it is very difficult for a beginner to put a raspberry Pi 3 inside a Gameboy.
I spent hours reading and seeing images of gameboy constructions, I liked banjokazooie projects, especially their order and cleaning, so mine is quite similar in distribution of components.
In my construction, all components are screwed, can be disassembled if needed, I have used very little Hot glue.
If anyone wants the list of components I put it here, but are "typical".
After a few weeks of hard work, I finally have my gameboy finished.
Mod case:
Amazon screen rear camera modified to 5V and hoolyloo's bracket with epoxy to case
Buttons connected via FPC to arcade USB decoder:
Re: Pity's #1 Gameboy Pi3
Raspberry Pi3 stripper, camble's diy shutdown, and Adradruit 1000C powerboost and modified cartridge:
USB sound card with potentiometer, amplifier and jack:
L/R buttons:
Plastic fiber optic to transmit the light of the powerboost led's to the top of the case:
USB sound card with potentiometer, amplifier and jack:
L/R buttons:
Plastic fiber optic to transmit the light of the powerboost led's to the top of the case:
Last edited by Pitygsi on Sat May 13, 2017 10:01 am, edited 1 time in total.
Re: Pity's #1 Gameboy Pi3
Assembling inside components, 4000mah battery:
Handmade separator case with the best sticker
Final assembly:
Handmade separator case with the best sticker
Final assembly:
Last edited by Pitygsi on Sat May 13, 2017 10:21 am, edited 2 times in total.
Re: Pity's #1 Gameboy Pi3
Final assembly
Works correctly, but have any problems with sound that not know how resolve, I need help please:
- I haven't sound in emulation station, in the games work correctly.
I hope that any helps me.
Thanks to all!
Jesús
Works correctly, but have any problems with sound that not know how resolve, I need help please:
- I haven't sound in emulation station, in the games work correctly.
I hope that any helps me.
Thanks to all!
Jesús
Last edited by Pitygsi on Tue Oct 17, 2017 1:47 pm, edited 2 times in total.
-
- Posts: 230
- Joined: Sat Oct 29, 2016 12:31 am
- Location: Gelderland, Netherlands
- Has thanked: 55 times
- Been thanked: 60 times
Re: Pity's #1 Gameboy Pi3
Nice build. If i may ask how dit you do the cutout of the screen,
Whooo Stop befor ask in a post. First use the search or the wiki befor you make a topic.. Just saying.........
Re: Pity's #1 Gameboy Pi3
With a Chinese cutter and patience , then pass it over with fine sandpaper.
Thanks for the comments
Jesús.
- RetroRocket
- Posts: 146
- Joined: Sun Apr 09, 2017 8:53 pm
- Location: Seattle
- Has thanked: 60 times
- Been thanked: 64 times
- Contact:
Re: Pity's #1 Gameboy Pi3
Super slick, I love how clean and organized the guts are. Inspiring me to plan mine out a bit more before the hot glue.
- Lphillimore
- Posts: 993
- Joined: Sat Jan 07, 2017 7:03 pm
- Location: Perth, WA
- Has thanked: 796 times
- Been thanked: 527 times
Re: Pity's #1 Gameboy Pi3
This is great work.
mintyPi Giveaway [CLOSED]:
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
http://www.sudomod.com/forum/viewtopic.php?f=38&t=3456
Builds:
GBZ
http://www.sudomod.com/forum/viewtopic.php?f=9&t=2838
mintyPi
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3468
Kite SAIO
http://www.sudomod.com/forum/viewtopic.php?f=9&t=3075
Dreamcast VMU
https://sudomod.com/forum/viewtopic.php ... 133#p62133
Who is online
Users browsing this forum: No registered users and 1 guest