Page 3 of 4
Re: ABH's GameBoy SP ZeroW
Posted: Tue Oct 02, 2018 12:13 pm
by Woozer
Ziploc99 wrote: ↑Mon Oct 01, 2018 8:00 am
I am interested to know if you were still going to make the PCB? Was hoping codeman0624 would make his AIO for the GBA SP but it looks like that project died (really too bad). I would like to make one of these if you ever find time to get the PCB made (I can imagine it's not an easy process)
Very cool build by the way. Your skills are legit.
Patience I guess
In the meanwhile, you could check github.
https://github.com/Gameboypi/SPW
Re: ABH's GameBoy SP ZeroW
Posted: Wed Oct 03, 2018 3:35 pm
by ABH
Woozer wrote: ↑Tue Oct 02, 2018 12:13 pm
Ziploc99 wrote: ↑Mon Oct 01, 2018 8:00 am
I am interested to know if you were still going to make the PCB? Was hoping codeman0624 would make his AIO for the GBA SP but it looks like that project died (really too bad). I would like to make one of these if you ever find time to get the PCB made (I can imagine it's not an easy process)
Very cool build by the way. Your skills are legit.
Patience I guess
In the meanwhile, you could check github.
https://github.com/Gameboypi/SPW
I don't know where you got the link from I did not post it anywhere lol
Very soon
still working on it and that’s my first time using GitHub I just have to get used to it.
Re: ABH's GameBoy SP ZeroW
Posted: Wed Oct 03, 2018 11:27 pm
by Woozer
Google already indexed that github page i quess
And don't worry, it's awesome already.
Re: ABH's GameBoy SP ZeroW
Posted: Sun Jan 13, 2019 12:51 pm
by BorealBlizzard
do you know if
this screen would fit?
Re: ABH's GameBoy SP ZeroW
Posted: Sun Jan 13, 2019 1:28 pm
by ABH
Will not fit, without making some modifications
Check out this post :
https://www.sudomod.com/forum/viewtopic ... Fit#p40984
Re: ABH's GameBoy SP ZeroW
Posted: Mon Mar 11, 2019 1:29 pm
by Jo.Ckel
ABH wrote: ↑Wed Jul 12, 2017 7:30 am
Hi this is a project i have been working in it for a while and i'd like to share it with you
and your feedback would be very helpfull
Regards
First of all ,, Sorry i don't have many picters for screens so i use them from web site to describe how i fit the screen.
i use orginal gameboy sp battery and it gives me 50 min play ( maby i will upgrade it )
- I cut down the board to make it fit
Untitled-1.jpg
- It's fit perfectly with the orginal gameboy sp housing
IMG_5735.JPG
- this is how i wiring the buttons
gbasp_button_pads.jpg
- this is picturs of how i fit everythings
IMG_6102.JPG
IMG_6103.JPG
IMG_6104 copy.jpg
- 1 & 2 it's screen and buttons wiring
Untitled-1RR.jpg
IMG_6108.JPG
- I used this port for micro usb
IMG_6111.JPG
IMG_6109.JPG
IMG_6114.JPG
Reference :
How to - Use the GPIO for Buttons instead of a Teensy
How-to: Use USB Audio in Retropie v3.7
https://learn.adafruit.com/running-open ... itft-setup
Many thanks to them
hope you enjoy it
really awesome!
this seems a very nice weekend project, if you do have all parts available and know how to do
Brgds
Jo
Re: ABH's GameBoy SP ZeroW
Posted: Sun May 26, 2019 7:42 am
by WoodMill
ABH wrote: ↑Sun Jan 13, 2019 1:28 pm
.
Been obsessing about building one of these from @abh, ever since I realized getting a hold of a Backlit GBA SP is about just as expensive.
So I've looked over the Github project. Spec'd out all the parts. Looked at Oshpark for the PCB. Looks like its going to be just shy of $60 for 3 boards. Is there a better place to get the PCB made?
The one question I had, has the safe shutdown been added to the Image? Or has it been figured out?
Re: ABH's GameBoy SP ZeroW
Posted: Sun May 26, 2019 8:03 am
by VeteranGamer
WoodMill wrote: ↑Sun May 26, 2019 7:42 am
So I've looked over the Github project. Spec'd out all the parts. Looked at Oshpark for the PCB. Looks like its going to be just shy of $60 for 3 boards. Is there a better place to get the PCB made?
https://www.pcbway.com/
$5 (10 boards) + shipping (just go for the basic around $6-7, it doesnt take that long...around the same as oshpark)
create an account....
upload the file....
pick the colour of the board you want....
pay...
and wait....
you should have them in around two week (thats the average I get)
.
Re: ABH's GameBoy SP ZeroW
Posted: Sun May 26, 2019 10:28 am
by danisdb
WoodMill wrote: ↑Sun May 26, 2019 7:42 am
The one question I had, has the safe shutdown been added to the Image? Or has it been figured out?
Hi whats up ive been investigated this project too and i found this post with few information about battery monitoring and safe shutdown in spw , but its not implemented in power button, you need to shortcut shutdown and power off after that.
Hope it will help.
viewtopic.php?f=42&t=4585&start=140
Re: ABH's GameBoy SP ZeroW
Posted: Fri Jul 05, 2019 3:37 pm
by WoodMill
VeteranGamer wrote: ↑Sun May 26, 2019 8:03 am
WoodMill wrote: ↑Sun May 26, 2019 7:42 am
So I've looked over the Github project. Spec'd out all the parts. Looked at Oshpark for the PCB. Looks like its going to be just shy of $60 for 3 boards. Is there a better place to get the PCB made?
https://www.pcbway.com/
$5 (10 boards) + shipping (just go for the basic around $6-7, it doesnt take that long...around the same as oshpark)
create an account....
upload the file....
pick the colour of the board you want....
pay...
and wait....
you should have them in around two week (thats the average I get)
.
So I've tried PCBway, and the file Errors out. This is the message they give me: "Could not open the file.We need gerber file in fomat of RS-274x" And they attached this photo.
- gerber-error.png (16.75 KiB) Viewed 7165 times