Page 1 of 5
My first HDMI build
Posted: Sun Sep 17, 2017 3:38 am
by tinkerBOY
I have completed this build a week ago and forgot to share it here because i've been enjoying playing games with it especially GBA games. The kedei hdmi screen is awesome! It's a 480x320 screen.
I used a short hdmi cable for this build and removed the insulation. Hardest part is the glue on each end of the cable. It's super hard.
- IMG_1677.JPG (1.22 MiB) Viewed 58627 times
- IMG_1678.JPG (945.61 KiB) Viewed 58627 times
- IMG_1679.JPG (1.46 MiB) Viewed 58627 times
- IMG_1680.JPG (1.39 MiB) Viewed 58627 times
- IMG_1681.JPG (1.05 MiB) Viewed 58627 times
- IMG_1682.JPG (877.8 KiB) Viewed 58627 times
- IMG_1683.JPG (1011.6 KiB) Viewed 58627 times
- IMG_1684.JPG (1.56 MiB) Viewed 58626 times
Major parts are:
- Kedei 3.5" hdmi screen(later models with brighter lcd)
- pi zero
- simple pcb button
- pam8403 audio amp
- 2500mah battery
- IMG_1685.JPG (1.8 MiB) Viewed 58533 times
- IMG_1686.JPG (1.74 MiB) Viewed 58533 times
- IMG_1687.JPG (1.78 MiB) Viewed 58533 times
Re: My first HDMI build
Posted: Sun Sep 17, 2017 3:48 am
by jb32647
Good job, it looks incredibly clean.
Re: My first HDMI build
Posted: Sun Sep 17, 2017 3:57 am
by tinkerBOY
jb32647 wrote: ↑Sun Sep 17, 2017 3:48 am
Good job, it looks incredibly clean.
Thanks! Nothing special here really except for the screen. It's way way better than my composite build. Games look much better. Much sharper and clearer.
Re: My first HDMI build
Posted: Sun Sep 17, 2017 4:13 am
by Codemaster123
zeroboy wrote: ↑Sun Sep 17, 2017 3:38 am
I used a short hdmi cable for this build and removed the insulation. Hardest part is the glue on each end of the cable. It's super hard.
I can open it again and take some pictures inside if anyone wants it.
very super build i likey alot
how you fit inside, please show
Re: My first HDMI build
Posted: Sun Sep 17, 2017 4:15 am
by tinkerBOY
Codemaster123 wrote: ↑Sun Sep 17, 2017 4:13 am
zeroboy wrote: ↑Sun Sep 17, 2017 3:38 am
I used a short hdmi cable for this build and removed the insulation. Hardest part is the glue on each end of the cable. It's super hard.
I can open it again and take some pictures inside if anyone wants it.
very super build i likey alot
how you fit inside, please show
I'll take some pictures tomorrow and update this thread.
Re: My first HDMI build
Posted: Sun Sep 17, 2017 4:17 am
by Codemaster123
zeroboy wrote: ↑Sun Sep 17, 2017 4:15 am
Codemaster123 wrote: ↑Sun Sep 17, 2017 4:13 am
zeroboy wrote: ↑Sun Sep 17, 2017 3:38 am
I used a short hdmi cable for this build and removed the insulation. Hardest part is the glue on each end of the cable. It's super hard.
I can open it again and take some pictures inside if anyone wants it.
very super build i likey alot
how you fit inside, please show
I'll take some pictures tomorrow and update this thread.
thankyou
where you chargre only light i see
Re: My first HDMI build
Posted: Sun Sep 17, 2017 4:19 am
by tinkerBOY
Codemaster123 wrote: ↑Sun Sep 17, 2017 4:17 am
zeroboy wrote: ↑Sun Sep 17, 2017 4:15 am
Codemaster123 wrote: ↑Sun Sep 17, 2017 4:13 am
very super build i likey alot
how you fit inside, please show
I'll take some pictures tomorrow and update this thread.
thankyou
where you chargre only light i see
Charging port is below the headphone jack
Re: My first HDMI build
Posted: Sun Sep 17, 2017 4:30 am
by Codemaster123
zeroboy wrote: ↑Sun Sep 17, 2017 4:19 am
Codemaster123 wrote: ↑Sun Sep 17, 2017 4:17 am
zeroboy wrote: ↑Sun Sep 17, 2017 4:15 am
I'll take some pictures tomorrow and update this thread.
thankyou
where you chargre only light i see
Charging port is below the headphone jack
very good please show inside this mastery
Re: My first HDMI build
Posted: Sun Sep 17, 2017 11:40 am
by YaYa
oh yeah really clean... at first look, i didn't see the charging port under the audio jack.
Well done. A close look inside would be appreciated when you'll have time to shoot it
Re: My first HDMI build
Posted: Sun Sep 17, 2017 12:25 pm
by VeteranGamer
nice build....
finally some HDMI builds popping up....
it would be nice to see how you have the internals layed out....
thanks