Mr.D4vids Build Log

[rodocop]

Yeah. That's fine. Have you checked the support thread for the helder aios I know some of the white boards have had low volume issues. Some of the reccomended things are to replace the r15 and r16 resistors.

https://sudomod.com/forum/search.php?ke ... sf=msgonly

Are you getting any sound or just really quiet?

[VeteranGamer]

It should be okay then. But confirm that this is at the bottom of the config.txt


dtoverlay=pwm-2chan,pin=18,func=2,pin2=13,func2=4

To see the file type sudo nano /boot/config.txt

Hmm... thats a good point I never actually confirmed through the portal, I did confirm on the text file I will post up results when I get home.

Hey Rodocop.

I think its correct no?

See hereShow

i would suggest to put a jumper from the forth pin of the PAM8403 to a 5V point on the power strip....

see if that helps....




.

[d4vid4f]

Hey rodocop, No sound at all unless I plug in my headphones, and i only get static through the head phones. I did read through the support thread but nothing I haven't already tried.
I will look into the resistors.

Hey Veteran Gamer,

Thanks for the tip I will try that this weekend. before I try the new resistors.

But if all else fails I might just get a USB sound card and move on.

Thanks again for the help guys.

[YaYa]

Nice job ! The look is very cool !

[d4vid4f]

Nice job ! The look is very cool !

Thanks YaYa!

[d4vid4f]

Hey guys I did try the jumper wire and confirmed it was getting power with my multimeter.

I also reflowed all the connections and still no luck...