sudomod

Posted: **Wed Feb 13, 2019 11:59 am**

Hi
here is my Gameboy SP raspberry pi 3 A+ build with custom pcb
I'd like to share it with you guys.

#Spec :
1- Raspberry Pi 3 A+
2- i2s audio
3- Gpio button input
4- Support original sp port for charging + micro usb
5- 3.2 spi screen
6- x & y buttons
7- Automatic fan activate when the CPU reaches 60c
8- TPS61030 for boosting and TP4056 for charging.
9-850mah battery "I will upgrade it to 2000mah until the new battery arrive"

: Screen Shot 2019-02-13 at 8.42.31 PM.png (1.85 MiB) Viewed 21234 times

: Screen Shot 2019-02-13 at 9.38.58 PM.png (1.53 MiB) Viewed 21234 times

: Screen Shot 2019-02-13 at 9.39.19 PM.png (1.6 MiB) Viewed 21234 times

: IMG_7213.jpg (433.61 KiB) Viewed 21234 times

: IMG_7188.JPG (195.45 KiB) Viewed 21234 times

: IMG_7221.JPG (2.51 MiB) Viewed 21234 times

: IMG_7222.JPG (2.15 MiB) Viewed 21234 times

: IMG_7546.JPG (2.44 MiB) Viewed 21234 times

Also i made this littil adepter to access the USB from the gameboy link port

: IMG_7547.JPG (2.12 MiB) Viewed 21234 times

: IMG_7548.JPG (2.93 MiB) Viewed 21234 times

: IMG_7549.JPG (2.63 MiB) Viewed 21234 times

Hope you enjoy it

Posted: **Wed Feb 13, 2019 12:11 pm**

its looks great....

you've got the GB SP on lock...

.

Posted: **Wed Feb 13, 2019 7:23 pm**

holy crap! that looks awesome! that's some really clean and pretty work my friend, kudos.

Posted: **Wed Feb 13, 2019 7:37 pm**

This is amazing. Are you selling PCBs?

Posted: **Thu Feb 14, 2019 6:49 am**

Very clean build. This is probably the hardest build to make because of the tiny console.
Congrats, its very nice!!!

Posted: **Thu Feb 14, 2019 2:00 pm**

That SP looks awesome and like a lot of work went into the pcb.

Posted: **Fri Feb 15, 2019 2:59 am**

This is beautiful!

Posted: **Fri Feb 15, 2019 10:51 am**

pretty incredible! i think it would be cool to have a custom 3d printed bottom half to allow you to use bigger batteries, and be able to use something like a full size USB and micro sd on the back instead because you can print the bottom half to have the proper cutouts

Posted: **Mon Feb 18, 2019 4:04 pm**

Top notch! Yeah, if you’re selling pcbs, I’m buying.

Posted: **Wed Feb 20, 2019 3:03 pm**

Very cool, interested on how you soldered the pi3A+? SMD header? or just direct mount and solder?

sudomod

ABH's GameBoy SP Rpi 3 A+

ABH's GameBoy SP Rpi 3 A+

Re: ABH's GameBoy SP Rpi 3 A+

Re: ABH's GameBoy SP Rpi 3 A+

Re: ABH's GameBoy SP Rpi 3 A+

Re: ABH's GameBoy SP Rpi 3 A+

Re: ABH's GameBoy SP Rpi 3 A+

Re: ABH's GameBoy SP Rpi 3 A+

Re: ABH's GameBoy SP Rpi 3 A+

Re: ABH's GameBoy SP Rpi 3 A+

Re: ABH's GameBoy SP Rpi 3 A+