My first Custom DMG, CM3, Kite CS, PSP stick, no punches pulled.
-
- Posts: 52
- Joined: Fri Feb 23, 2018 10:17 pm
- Has thanked: 19 times
- Been thanked: 26 times
My first Custom DMG, CM3, Kite CS, PSP stick, no punches pulled.
Hey everyone, I’ve been meaning to make this post for a while. I completed the project back in July, but got crazy busy with work.
Here’s my first build. I’ve got a good amount of experience with hobby electronics (I’m a Mod on Therebelarmory.com, where we build crazy lightsabers), so I decided to start big. Very clean install, minimal glue.
The specs:
Kubino case
Kite CS
PI CM3
Dex Tech battery
Veco bass speaker
Plethora of hoolyhoo brackets.
Hoolyhoo fan cartridge (custom printed from shapeways).
Hoolyhoo psp screen bracket.
Hoolyhoo back button board (L1 L2 R1 R2).
PSP joystick
Buttons from I can’t remember where (one of the big game boy modding sites).
Stickers and glass CM3 screen protector from Yaya.
This thing is epic and runs like a champ. Huge thanks to hoolyhoo, yaya, and kubino. I actually messaged Hooly extensively and he was INCREDIBLE to work with. His files are the bees knees. Kubino also, his work is incredible. Yaya also, AMAZING stickers and fantastic glass screen. Bravo to you three, couldn’t have done it without you.
It’s a dream machine, it brings me back to when I got the first DMG (still have four of them laying around). I feel like I have my childhood back.
Big thanks to Kite also. The board is amazing, and extremely stable. I’ve had ZERO issues with it.
I should also mention, this 5,000 mah battery from Dex is CRAZY. I’ve charged it fewer times than I have fingers. The battery life is astronomical. It blows away EVERY other device in my house.
**If anyone is interested, I can dig the internal install photos out of my old phone.
Here’s my first build. I’ve got a good amount of experience with hobby electronics (I’m a Mod on Therebelarmory.com, where we build crazy lightsabers), so I decided to start big. Very clean install, minimal glue.
The specs:
Kubino case
Kite CS
PI CM3
Dex Tech battery
Veco bass speaker
Plethora of hoolyhoo brackets.
Hoolyhoo fan cartridge (custom printed from shapeways).
Hoolyhoo psp screen bracket.
Hoolyhoo back button board (L1 L2 R1 R2).
PSP joystick
Buttons from I can’t remember where (one of the big game boy modding sites).
Stickers and glass CM3 screen protector from Yaya.
This thing is epic and runs like a champ. Huge thanks to hoolyhoo, yaya, and kubino. I actually messaged Hooly extensively and he was INCREDIBLE to work with. His files are the bees knees. Kubino also, his work is incredible. Yaya also, AMAZING stickers and fantastic glass screen. Bravo to you three, couldn’t have done it without you.
It’s a dream machine, it brings me back to when I got the first DMG (still have four of them laying around). I feel like I have my childhood back.
Big thanks to Kite also. The board is amazing, and extremely stable. I’ve had ZERO issues with it.
I should also mention, this 5,000 mah battery from Dex is CRAZY. I’ve charged it fewer times than I have fingers. The battery life is astronomical. It blows away EVERY other device in my house.
**If anyone is interested, I can dig the internal install photos out of my old phone.
- Attachments
-
- C6100421-1721-45BC-9EB5-454F82185F6E.jpeg (3.47 MiB) Viewed 8165 times
-
- 583EF56C-04EA-4663-8E75-601BFA233D22.jpeg (3.19 MiB) Viewed 8165 times
-
- C0C4DA68-649B-4799-86F4-72FAA0E77347.jpeg (3.27 MiB) Viewed 8165 times
-
- F0013A4D-DC53-4DDF-A338-8CCFE3496261.jpeg (3.64 MiB) Viewed 8165 times
-
- 952F0AB3-5A0E-4736-A09C-97CA9D76E72E.jpeg (3.37 MiB) Viewed 8165 times
-
- 11D538B4-F4FC-4E8B-B0BB-81E06CF8A168.jpeg (3.64 MiB) Viewed 8165 times
-
- 8F74A501-EABC-457A-B813-679FD90B4548.jpeg (3.28 MiB) Viewed 8165 times
Last edited by ZahcStarKiller on Sat Mar 09, 2019 10:33 pm, edited 5 times in total.
-
- Posts: 15
- Joined: Tue Aug 29, 2017 3:28 pm
- Has thanked: 3 times
- Been thanked: 9 times
-
- Posts: 52
- Joined: Fri Feb 23, 2018 10:17 pm
- Has thanked: 19 times
- Been thanked: 26 times
-
- Posts: 17
- Joined: Sat Mar 02, 2019 12:22 pm
- Location: Portland, OR, USA
- Has thanked: 6 times
- Been thanked: 6 times
- Contact:
Re: My first Custom DMG, CM3, Kite CS, PSP stick, no punches pulled.
I love the LEDs, what did you use for those? 2mm towers?
-
- Posts: 52
- Joined: Fri Feb 23, 2018 10:17 pm
- Has thanked: 19 times
- Been thanked: 26 times
Re: My first Custom DMG, CM3, Kite CS, PSP stick, no punches pulled.
Those leds are just SMD leds attached to the Kite CS board. Kubino had been playing around with drilling holes in the case so the leds could be seen, so I had him do that to my case. Turned out great!
- Robochris
- Posts: 310
- Joined: Thu Feb 16, 2017 7:49 am
- Location: Ohio
- Has thanked: 82 times
- Been thanked: 41 times
Re: My first Custom DMG, CM3, Kite CS, PSP stick, no punches pulled.
I really dig the colors too. Nice to see something other than classic dmg/snes/sfc/black or white builds.
"What a horrible night to have a curse."
VMU viewtopic.php?f=62&t=7623
Gbz1 viewtopic.php?f=43&t=2853
Gbz2 viewtopic.php?f=43&t=3174
Gbz3 viewtopic.php?f=43&t=6095&p=62287#p62287
Mintypi viewtopic.php?f=32&t=3580
PocketPi viewtopic.php?f=43&t=8643
VMU viewtopic.php?f=62&t=7623
Gbz1 viewtopic.php?f=43&t=2853
Gbz2 viewtopic.php?f=43&t=3174
Gbz3 viewtopic.php?f=43&t=6095&p=62287#p62287
Mintypi viewtopic.php?f=32&t=3580
PocketPi viewtopic.php?f=43&t=8643
- papajsantos
- Posts: 31
- Joined: Wed Oct 24, 2018 6:35 am
- Has thanked: 21 times
- Been thanked: 5 times
Re: My first Custom DMG, CM3, Kite CS, PSP stick, no punches pulled.
I for one would LOVE some nudes...
Re: My first Custom DMG, CM3, Kite CS, PSP stick, no punches pulled.
were did you get the clear yellow buttons ?! been looking for a while for these .
it looks awesome btw
it looks awesome btw
- infinitLoop
- Posts: 536
- Joined: Mon Dec 24, 2018 11:46 am
- Location: Portland, OR
- Has thanked: 222 times
- Been thanked: 199 times
- Contact:
Re: My first Custom DMG, CM3, Kite CS, PSP stick, no punches pulled.
I’m gonna take a guess that they’re from kitsch bent...
https://store.kitsch-bent.com/product/custom-buttons
Some of my builds...
BMO GBZ
Star Wars Millenium Falcon Challenge
Game Boy Color Zero
... and another Gameboy Color Zero with custom 3D-printed parts
"Ultimate" 3A+ Build
GlowBoy Zero
Some 3d designs I've done...
Soft Tactile Shoulder Buttons, for screw-hole, well mounting
Snap-in, Soft Tactile Shoulder Button insert, for screw-hole, well mounting
Pac-Man and Space Invaders Themed Rear Fan Holder
BMO GBZ
Star Wars Millenium Falcon Challenge
Game Boy Color Zero
... and another Gameboy Color Zero with custom 3D-printed parts
"Ultimate" 3A+ Build
GlowBoy Zero
Some 3d designs I've done...
Soft Tactile Shoulder Buttons, for screw-hole, well mounting
Snap-in, Soft Tactile Shoulder Button insert, for screw-hole, well mounting
Pac-Man and Space Invaders Themed Rear Fan Holder
-
- Posts: 52
- Joined: Fri Feb 23, 2018 10:17 pm
- Has thanked: 19 times
- Been thanked: 26 times
Re: My first Custom DMG, CM3, Kite CS, PSP stick, no punches pulled.
I do believe you are right. I do have a Kitsch Bent rubber wrist band, so that sounds right.infinitLoop wrote: ↑Fri Mar 15, 2019 8:53 amI’m gonna take a guess that they’re from kitsch bent...
https://store.kitsch-bent.com/product/custom-buttons
Who is online
Users browsing this forum: No registered users and 1 guest