Sparkle GBZ with Custom Soft Tactile Shoulder Buttons

Show off your completed Game Boy Zero, or post your build logs here!
Post Reply
User avatar
infinitLoop
Posts: 383
Joined: Mon Dec 24, 2018 11:46 am
Has thanked: 164 times
Been thanked: 131 times
Contact:

Sparkle GBZ with Custom Soft Tactile Shoulder Buttons

Post by infinitLoop » Wed Mar 13, 2019 7:02 pm

This is almost, not quite, done, but I think it's in a show-off-able place, and I wanted to share these buttons that I made, because I think they turned out pretty neat, especially for my first-ish 3d design (not counting a few super simple brackets and stuff). They are definitely my favorite shoulder buttons I've done yet, hands-down.
IMG_5216.jpg
IMG_5216.jpg (732.31 KiB) Viewed 1256 times
IMG_5209.jpg
IMG_5209.jpg (836.83 KiB) Viewed 1256 times
I did two custom builds that I had to shelve because I couldn't fit the case together in the end, and end up breaking connections loose and generally messing them up trying to get the case together, so I wanted to do one I thought I had a reasonable chance having enough space in. So, all-in-one it is, but I still had to "challenge" myself so decided to make some rear buttons to go with the soft-tactile buttons mounted on the screen bracket. I gotta say, they feel incredible, so I'll share my stl file if anyone else wants to go this route. I originally was going to design a button well instead for the original dmg style, but went this way with a solid button and using the pegs in the case as a guide.

the buttons sit straight, and don't protrude past the case, so you can set the gameboy down without hitting the buttons. The basically feel like dmg buttons, I think. I gave mine a light sanding and coated in clear coat, and they feel super nice. I just used the original screw holes as guides, and a step-up hole drill to get to the same diamter as the dmg buttons.
IMG_5213.jpg
IMG_5213.jpg (498.96 KiB) Viewed 1256 times
here is the build - i did have some extra leds in this first pic, in the cart, but i removed them since the one built onto the power supply looked good just shining through the case, once I had it together. these are also early version of the buttons
opened upShow
IMG_5190.jpg
IMG_5190.jpg (1.1 MiB) Viewed 1256 times
parts list
aftermarket sparkle case from retromodding.com
a and b buttons are 2-piece from handheldlegend.com with black inner and clear outer
x and y are just standard dmg buttons
white (pads) and black (start/select) silicone from retromodding.com
glass screen protector from handhellegend.com
all-in-one board from glitchdgaming.com which was great (assuming i get the audio going)
gearbest composite screen
generic power supply
helder's 4500mah battery
8ohm 2w speaker and some ferrite beads
power switch, barrel jack, audio pot and usb port
soft and regular tactile buttons (safe shutdown on top is a "clicky" button)

i printed all the parts with some sparkly plastic i got for it.

i'm not sure which stl i used for the screen, but I think it's one in this thread: viewtopic.php?f=58&t=4981

the power switch and barrel plug bracket is off of thingiverse

i used the original external connector cover, and clipped the tabs a bit to fit a usb port.

more pics:
side stuff (rear buttons in these are early, not final)Show
IMG_5202.jpg
IMG_5202.jpg (561.77 KiB) Viewed 1256 times
IMG_5198.jpg
IMG_5198.jpg (541.57 KiB) Viewed 1256 times
IMG_5200.jpg
IMG_5200.jpg (538.05 KiB) Viewed 1256 times
back of the caseShow
IMG_5218.jpg
IMG_5218.jpg (696.52 KiB) Viewed 1256 times
buttons from the inside / rearShow
IMG_5210.jpg
IMG_5210.jpg (704.34 KiB) Viewed 1256 times
batteryShow
IMG_5219.jpg
IMG_5219.jpg (688.17 KiB) Viewed 1256 times
For some reason that I haven't discovered, the audio isn't working yet on this build, so that might suck to figure out. I also just got some waterslide decals that I am going to start messing with, and hopefully I can add an "x" and "y" on here along with a couple other embellishments, however, in order not to ruin this one, I need to do a little practice first since I have not used those decals yet, but they sure do look good from what I have seen. I'm also still tweaking a custom splashscreen to match the sparkle and make it really personal.
soft shoulder well buttons.stl
(168.34 KiB) Downloaded 60 times

User avatar
infinitLoop
Posts: 383
Joined: Mon Dec 24, 2018 11:46 am
Has thanked: 164 times
Been thanked: 131 times
Contact:

Re: Sparkle GBZ with Custom Soft Tactile Shoulder Buttons

Post by infinitLoop » Thu Mar 14, 2019 6:55 pm

updated the button design a bit for better stability:
IMG_5221.jpg
IMG_5221.jpg (780.41 KiB) Viewed 1198 times
soft shoulder well buttons w guides.stl
(184.85 KiB) Downloaded 59 times
Last edited by infinitLoop on Thu May 23, 2019 7:45 pm, edited 1 time in total.

User avatar
correia5022
Posts: 202
Joined: Mon Dec 05, 2016 12:32 am
Location: Portugal
Has thanked: 17 times
Been thanked: 38 times

Re: Sparkle GBZ with Custom Soft Tactile Shoulder Buttons

Post by correia5022 » Fri Mar 15, 2019 1:12 pm

Very nice and clean, congratz
________________________________________
Starting on electronics :)
My first build, 2 years later
https://sudomod.com/forum/viewtopic.php ... 8&start=30
Check out my Boombox: https://nrcboombox.wixsite.com/website

User avatar
infinitLoop
Posts: 383
Joined: Mon Dec 24, 2018 11:46 am
Has thanked: 164 times
Been thanked: 131 times
Contact:

Re: Sparkle GBZ with Custom Soft Tactile Shoulder Buttons

Post by infinitLoop » Fri Mar 15, 2019 7:44 pm

Here's the final inside layout, with everything working (great!) and most of the waterslide decals I was going to put on there. I have one more i want to put on the back, but I'm going to have to do the drawing for what I want there, so maybe this weekend.

all in all I really like this guy. The sparkly thing isn't really my style preference - it was a request from my wife - but it was pretty fun, and I really love how these shoulder buttons turned out. With the soft tactile buttons, they feel just like real gameboy buttons, with really satisfying action. Next I think I'll adapt the design to snap in dmg buttons for one of the custom builds I need to rework to get to fit.
IMG_5229.jpg
IMG_5229.jpg (670.69 KiB) Viewed 1132 times
backShow
IMG_5230.jpg
IMG_5230.jpg (921.66 KiB) Viewed 1132 times
opened up, inside - tidy, minimal hot glueShow
IMG_5226.jpg
IMG_5226.jpg (1.1 MiB) Viewed 1132 times
back of the buttonShow
IMG_5225.jpg
IMG_5225.jpg (797.09 KiB) Viewed 1132 times

User avatar
Robochris
Posts: 282
Joined: Thu Feb 16, 2017 7:49 am
Location: Ohio
Has thanked: 79 times
Been thanked: 39 times

Re: Sparkle GBZ with Custom Soft Tactile Shoulder Buttons

Post by Robochris » Sat Mar 16, 2019 10:08 am

Very well done. Nice and clean! It’s always nice to see something other than classic/snes/sfc/black and white builds. Haha.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest