Woodboy
Posted: Wed Jun 12, 2019 3:33 pm
Hi, build a DMG with wood. right one children playing with toys out of wood! Oh, it was a lot of work... All is handmade without machines. Very stupit idea to do this!
Inside is a GBA SP ags-101. First plan was to fit a Bittboy in it. But this Consol is to buggy at the moment. Now the DMG have 4 buttons on Front and X+Y now sholder buttons from GBA.
Use a micro usb breakout board to load and a 2Ampere Lipo. A reset switch is on the left side and on the right the orginal Volume slider from the GBA. Inside the GB a Ez-flash 4 the Cardridge is only Dummy. The wood finish is 3x layer of clear lack.
Inside is a GBA SP ags-101. First plan was to fit a Bittboy in it. But this Consol is to buggy at the moment. Now the DMG have 4 buttons on Front and X+Y now sholder buttons from GBA.
Use a micro usb breakout board to load and a 2Ampere Lipo. A reset switch is on the left side and on the right the orginal Volume slider from the GBA. Inside the GB a Ez-flash 4 the Cardridge is only Dummy. The wood finish is 3x layer of clear lack.