New Build won't detect any gamepad

Having trouble with your GBZ build? Ask your questions here!
Post Reply
nmogv2
Posts: 4
Joined: Fri Jun 26, 2020 6:11 pm

New Build won't detect any gamepad

Post by nmogv2 » Sun Jan 16, 2022 6:50 pm

Hello,

So I've been working on a custom pi0 build with usb-c and a custom case. The only issue is that I keep getting the "No controller recognized" screen, and when i try holding any button nothing seems to input. I've attached all my wiring. I have also already attempted to used a micro-b cable and use those wires and plug directly into the usb port on the pi, which didnt work. Finally I also tried to use my switch pro controller through the USB-c port and that also did not recognize. There is no continuity between D+ and D- according to my multimeter, and honestly Im out of ideas as to why this isnt working.
Attachments
IMG_3969.JPG
IMG_3969.JPG (3.09 MiB) Viewed 3095 times

User avatar
rodocop
Posts: 1723
Joined: Mon Aug 22, 2016 3:14 pm
Location: Saskatchewan
Has thanked: 606 times
Been thanked: 608 times

Re: New Build won't detect any gamepad

Post by rodocop » Fri Jan 21, 2022 8:46 pm

Just to confirm, on the other side of the DPI board there should be two solder points for the data pads on the pi. I assume those are soldered?

Image

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest