Hey all,
My gbz was crashing and why I found out what is was I crossed the power and ground wires while the power was on, now my GBZ wont start.
Did I kill my battery?
Gound and power cable crossed. Battery dead?
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: Gound and power cable crossed. Battery dead?
You might have killed the whole system. Test if the Pi even turns on by plugging it to a micro use on the OTG port.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
- moosepr
- Posts: 524
- Joined: Wed Jan 25, 2017 6:18 am
- Has thanked: 69 times
- Been thanked: 241 times
- Contact:
Re: Gound and power cable crossed. Battery dead?
If you're lucky, the battery is protected, and has just disconnected itself.
Try testing as helder suggested, if all is well then check the battery for any bulges. If the battery seems ok try plugging in the charger for a few seconds then see if you have life again.
If it's a protected battery, charging will reset the protection circuit and reconnect the power.
Try testing as helder suggested, if all is well then check the battery for any bulges. If the battery seems ok try plugging in the charger for a few seconds then see if you have life again.
If it's a protected battery, charging will reset the protection circuit and reconnect the power.
Get a small cheep LCD in your project https://www.sudomod.com/forum/viewtopic.php?f=22&t=2312
Wrap it all round a battery https://www.sudomod.com/forum/viewtopic.php?f=13&t=2292
Or use a custom PCB to make it really small https://www.sudomod.com/forum/viewtopic.php?f=13&t=2512
or make it really really really really tiny!! https://www.sudomod.com/forum/viewtopic.php?f=13&t=2919
Wrap it all round a battery https://www.sudomod.com/forum/viewtopic.php?f=13&t=2292
Or use a custom PCB to make it really small https://www.sudomod.com/forum/viewtopic.php?f=13&t=2512
or make it really really really really tiny!! https://www.sudomod.com/forum/viewtopic.php?f=13&t=2919
Re: Gound and power cable crossed. Battery dead?
I was lucky, only the audio amp fried.
The battery is fully intact, no bubbles or something, for some reason it did fully drain itself.
But after charging nothing seems wrong.
The battery is fully intact, no bubbles or something, for some reason it did fully drain itself.
But after charging nothing seems wrong.
Who is online
Users browsing this forum: No registered users and 1 guest