sudomod

Hallo. To start with, sorry for my bad english. It's not my native language, i'm from Denmark. I want to start building my first GBZ. I've never tried anything like this before. Nor do I even have the great sense of soldering things, but everything has to be the first time.

I hope you can help and guide me to the right things I need. If I'm missing something on the list, just say so. First of all, I want to build my GBZ over Kite's Super AIO. When Kite opens pre-order, I hope i can buy one. Also is there a walkthrough on building it with Kite's Super AIO?

Gameboy shell https://www.aliexpress.com/item/For-Gam ... st=ae803_3

Buttons for GB https://www.aliexpress.com/item/For-GBC ... 0.0.Bjrgj4

Conductive buttons https://www.aliexpress.com/item/Rubber- ... 0.0.XMgjR9

Cartridge https://www.aliexpress.com/item/5PCS-Ca ... st=ae803_3

USB-Cabel https://www.aliexpress.com/item/1m-2-4A ... 60883.html

Mini micro JST https://www.aliexpress.com/item/20-SETS ... st=ae803_3

Screen https://retropiehandhelds.com/product/c ... een-border

SAIO SNES brackel 3D-Print http://www.sudomod.com/forum/viewtopic.php?f=27&t=2553

GBZ 5500mAh Lipo battery http://www.sudomod.com/forum/viewtopic.php?f=38&t=2320

Speaker https://www.ebay.co.uk/p/Veco-28mm-8ohm ... /913758194

Buttons for L1, L2, R1 and R2 https://www.aliexpress.com/item/50PCS-6 ... 69199.html

On/Off switch https://www.aliexpress.com/item/Free-sh ... 52393.html

Raspberry Pi Zero W https://raspberrypi.dk/produkt/raspberr ... 4wQAvD_BwE

Micro SD Kort (64GB) https://www.24hshop.dk/64gb-sandisk-mob ... W0QAvD_BwE

Cutting tool https://www.aliexpress.com/item/3pcs-Hs ... st=ae803_3

Kapton tape https://www.aliexpress.com/item/Top-Qua ... st=ae803_3

Dremel https://www.frishop.dk/pi/Dremel-multiv ... UAQAvD_BwE

I already have:
Hobbyist cutting knife
Soledring tool
Tint
Flux
Help hand

Am I missing something?

you missed the on/off switch
and the tactile buttons if you are intended to use L/R buttons on the back

https://www.aliexpress.com/item/50PCS-6 ... 69199.html
https://www.aliexpress.com/item/Free-sh ... 52393.html

i recommend also buying a hobbyist cutting knife, a soledring tool, tint, flux, help hand

YaYa wrote: ↑

Sun Aug 20, 2017 12:29 am

you missed the on/off switch
and the tactile buttons if you are intended to use L/R buttons on the back

https://www.aliexpress.com/item/50PCS-6 ... 69199.html
https://www.aliexpress.com/item/Free-sh ... 52393.html

i recommend also buying a hobbyist cutting knife, a soledring tool, tint, flux, help hand

Of course, I totally forgot the "Tactile Tact Mini Push Buttons" and "on/off switch". Thanks.

I actually already have cutting knife, a soledring tool, tint, flux, help hand. Just forgot to write it on the post.

So you are ready lol.
Get sticked to kite's SAIO post to catch the third batch. Maybe you will get a board if he ordered more than pre-orders