Help getting board down to 5v

Having trouble with your GBZ build? Ask your questions here!
Post Reply
Macromun
Posts: 3
Joined: Sat Mar 10, 2018 10:20 pm

Help getting board down to 5v

Post by Macromun » Sun Mar 25, 2018 5:05 pm

I recently got a screen for my GBZ project and it isn't a screen that isn't on the forum. This was a screen bought off Amazon, (https://www.amazon.com/gp/product/B0045 ... UTF8&psc=1) and due to the nature of taking a product apart, I probably won't get a refund. If anyone could help me with this, it would be much appreciated! :D
Attachments
IMG_20180311_203032146.jpg
Back
IMG_20180311_203032146.jpg (146.13 KiB) Viewed 2156 times
IMG_20180310_234018944_LL.jpg
Front
IMG_20180310_234018944_LL.jpg (192.32 KiB) Viewed 2156 times

roxas232
Posts: 1
Joined: Tue Mar 27, 2018 9:00 pm

Re: Help getting board down to 5v

Post by roxas232 » Tue Mar 27, 2018 9:03 pm

Jump the power (red wire) to pin 3 on the AM569
http://www.datasheetlib.com/datasheet/1 ... #datasheet
It may work better if you remove the chip, not sure though

User avatar
Hex
Posts: 113
Joined: Tue Aug 16, 2016 12:10 am
Has thanked: 12 times
Been thanked: 47 times

Re: Help getting board down to 5v

Post by Hex » Wed Mar 28, 2018 1:51 pm

Another safer and sure shot method is to use the 3.3v pin of the pi to 3.3v pin of the board for power supply. GND to GND and TV to AV1. That should work just fine
Sent from 20,000 leagues under the sea

My Cardboard GBZ build : http://www.sudomod.com/forum/viewtopic.php?f=9&t=2851

EmulationStation optimization for Pi Zero : http://www.sudomod.com/forum/viewtopic.php?f=8&t=2922

Keyn
Posts: 3
Joined: Mon Apr 09, 2018 6:30 am
Has thanked: 1 time

Re: Help getting board down to 5v

Post by Keyn » Mon Apr 09, 2018 6:41 am

I got this bw board and I don't know how I can make it to 5V.
I would be happy if somebody can help me
:geek:
Attachments
Screenshot_20180409-143715_Gallery.jpg
Screenshot_20180409-143715_Gallery.jpg (1.04 MiB) Viewed 2016 times

User avatar
Thump52
Posts: 111
Joined: Fri Feb 03, 2017 7:34 am
Has thanked: 7 times
Been thanked: 27 times

Re: Help getting board down to 5v

Post by Thump52 » Mon Apr 09, 2018 8:12 am

Here you go, good luck with your build. :D :D
Attachments
GBZ BW Screen.jpg
GBZ BW Screen.jpg (751.87 KiB) Viewed 2010 times
Gus 8-)

Keyn
Posts: 3
Joined: Mon Apr 09, 2018 6:30 am
Has thanked: 1 time

Re: Help getting board down to 5v

Post by Keyn » Mon Apr 09, 2018 8:29 am

Thank you
And you only have to connect the yellow or the white wire to the raspberry or?

User avatar
Thump52
Posts: 111
Joined: Fri Feb 03, 2017 7:34 am
Has thanked: 7 times
Been thanked: 27 times

Re: Help getting board down to 5v

Post by Thump52 » Mon Apr 09, 2018 11:31 am

Yes only one, I personally just use the yellow wire.
Gus 8-)

Keyn
Posts: 3
Joined: Mon Apr 09, 2018 6:30 am
Has thanked: 1 time

Re: Help getting board down to 5v

Post by Keyn » Mon Apr 09, 2018 11:02 pm

Where did you got the screw bracket? :D

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest