Soldering Composite Video to Raspberry Pi 1 Model B

Having trouble with your GBZ build? Ask your questions here!
Post Reply
Jacob99
Posts: 6
Joined: Thu Apr 19, 2018 12:13 pm
Has thanked: 1 time
Been thanked: 1 time

Soldering Composite Video to Raspberry Pi 1 Model B

Post by Jacob99 » Sun Oct 14, 2018 8:42 am

I have used one of these screens: https://www.amazon.com/gp/product/B0045 ... UTF8&psc=1
for my project. I have modified the screen's board to run off of 5V, and previously had it working hooking up the yellow, black, and red wires, with a Raspberry Pi Zero W. I have been trying to get the same working with an old Raspberry Pi 1 Model B but have no idea where to connect the wires to on the board in order to get the screen to work. I tried connecting the red and black wires to the 5V and ground GPIO pins on the board and the yellow to the centre pin of the yellow RCA jack but had no luck. I haven't been able to find any documentation online for the board and have no idea where I should connect these 3 wires to this older Raspberry Pi.

I am very new to this, so sorry if this is a stupid question :P

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest