Hey guys
I wonder if there's an STL file available for bw screens that helps held in place the pi with the microSD card facing in the contrast port?
thanks
Is there an STL file for bw screen bracket and pi holder
- correia5022
- Posts: 202
- Joined: Mon Dec 05, 2016 12:32 am
- Location: Portugal
- Has thanked: 17 times
- Been thanked: 38 times
Is there an STL file for bw screen bracket and pi holder
________________________________________
Starting on electronics
My first build, 2 years later
https://sudomod.com/forum/viewtopic.php ... 8&start=30
Check out my Boombox: https://nrcboombox.wixsite.com/website
Starting on electronics
My first build, 2 years later
https://sudomod.com/forum/viewtopic.php ... 8&start=30
Check out my Boombox: https://nrcboombox.wixsite.com/website
- rodocop
- Posts: 1723
- Joined: Mon Aug 22, 2016 3:14 pm
- Location: Saskatchewan
- Has thanked: 606 times
- Been thanked: 608 times
Re: Is there an STL file for bw screen bracket and pi holder
There are lots on thingiverse. But these are the ones I use. (I use the one without stand offs for the shoulder buttons.)
Gameboy Zero 3.5" Screen Brackets found on #Thingiverse https://www.thingiverse.com/thing:3189347
Gameboy Zero 3.5" Screen Brackets found on #Thingiverse https://www.thingiverse.com/thing:3189347
_____________________________________________________
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
My Minty Pi builds:
http://www.sudomod.com/forum/viewtopic.php?f=32&t=3628
My GBZ builds:
http://www.sudomod.com/forum/viewtopic. ... 813#p50813
My modded DMG-01's:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2696
My NESpi:
http://www.sudomod.com/forum/viewtopic.php?f=13&t=2941
My Gaboze Pocaio's
https://sudomod.com/forum/viewtopic.php?f=13&t=6063
- correia5022
- Posts: 202
- Joined: Mon Dec 05, 2016 12:32 am
- Location: Portugal
- Has thanked: 17 times
- Been thanked: 38 times
Re: Is there an STL file for bw screen bracket and pi holder
Hey, thanks robocop. I think this is the one i was looking for. Sending for print somewhererodocop wrote: ↑Thu Jan 17, 2019 6:39 pmThere are lots on thingiverse. But these are the ones I use. (I use the one without stand offs for the shoulder buttons.)
Gameboy Zero 3.5" Screen Brackets found on #Thingiverse https://www.thingiverse.com/thing:3189347
still need to assemble the 3d printer lol
________________________________________
Starting on electronics
My first build, 2 years later
https://sudomod.com/forum/viewtopic.php ... 8&start=30
Check out my Boombox: https://nrcboombox.wixsite.com/website
Starting on electronics
My first build, 2 years later
https://sudomod.com/forum/viewtopic.php ... 8&start=30
Check out my Boombox: https://nrcboombox.wixsite.com/website
Who is online
Users browsing this forum: No registered users and 1 guest