Parts List

[DracShadows]

I am looking into building a GBZ and the parts list on the blog post some of the links were not working. I think I have found most of the parts needed. There are a few I can not find. I was hoping someone could let me know if I'm missing anything or if I'm just so far off it will never work.

Also if i mount the Raspberry Pi with the SD card accessed through the contrast slot would I need the cartridge reader and SD card adapter?
Does the tinkerBOY Power switch 5V/charging module replace the PowerBoost 1000C?

Amazon
DS-Lite GBA cartridge readers https://www.amazon.com/Replacement-Cart ... 802&sr=8-3

Adafruit
PowerBoost 1000C battery charger/5V boost  https://www.adafruit.com/product/2465

2500 mAh Lithium Ion Polymer Battery https://www.adafruit.com/product/328


Raspberry Pi 0W https://www.adafruit.com/product/3400

Tinkerboy $105.60
Speaker 402w https://www.tinkerboy.xyz/product/tinke ... ker-4o2w/

USB ports https://www.tinkerboy.xyz/product/usb-f ... ket-port/

10mm tactile switches https://www.tinkerboy.xyz/product/momen ... olor=Black

All-in-one button PCB tinkerBOY v3.0 https://www.tinkerboy.xyz/product/tinke ... olor=Black

tinkerBOY Add-On Board – with Pre-soldered USB Type A Port and 3-Pin VolumeWheel, Back Buttons https://www.tinkerboy.xyz/product/tinke ... b+-+BLACK

Game best lcd https://www.tinkerboy.xyz/product/gearb ... sticker/ PowerSwitch – 5V Boost and Charge Module https://www.tinkerboy.xyz/product/tinke ... rging+Port

Galaxy Gaming
Power strip https://galaxygaming.co.uk/shop/gameboy ... ply-strip/

Pre cut GB shell https://galaxygaming.co.uk/shop/shell-k ... shell-kit/