Hi, for my GBC zero i wantet to use the micro B port, which is allready used for power input to the charger, as an usb port too.
A simple schematic how it is wired up:
Is it possible to get power to the micro b port without frying the lipo charger ?
The only way i can imaging to solve this:
I am sure i shouldnt bridge the IN and OUT from the charger
If i had a spare charger i would try it, but i am sure thats not the way to do.
Pls leave me a feedback if you know what to do, or if i am on the right way (which i realy doubt).
USB OTG problem, will this burn down my GBCZ ?
-
- Posts: 12
- Joined: Wed May 17, 2017 11:20 pm
- Has thanked: 4 times
- Been thanked: 8 times
USB OTG problem will this burn down my GBCZ
the answer is no, it will not work, USB is only used for power supply.
It is designed as a LCD for displaying stored text in the microcontroller.
Dont know about something cheap that will work.
It is designed as a LCD for displaying stored text in the microcontroller.
Dont know about something cheap that will work.
-
- Posts: 5
- Joined: Mon Apr 01, 2019 1:37 pm
- Has thanked: 2 times
- Been thanked: 3 times
Re: USB OTG problem, will this burn down my GBCZ ?
Mind if I ask why you want to do this? As there may be altenatives, depending on your reasons
Who is online
Users browsing this forum: No registered users and 1 guest