[OSHPark] PWM Audio Buffer Boards (SMD and Through Hole)

[RazorX]

@Helder did you have a chance to check out the link above, i believe it has what you need for the USB Gecko SE

[Helder]

Yes it looks like it does but I don't have any of the parts needed to build one nor do I have the time for it now either. You can order the boards from OSHPark then buy the parts and program it yourself.

[RazorX]

Yes it looks like it does but I don't have any of the parts needed to build one nor do I have the time for it now either. You can order the boards from OSHPark then buy the parts and program it yourself.

i have made boards and had them done threw oshpark before but ive never soldered a atmel chip before im not sure with my soldering iron i could do it otherwise i would.

maybe i could order 12 boards im sure i couldnt mess up all 12 lol

[Helder]

I have 3 of those boards I ordered some time ago, if you want me to solder them up for just send me the parts and I'll take care of it.

[RazorX]

I have 3 of those boards I ordered some time ago, if you want me to solder them up for just send me the parts and I'll take care of it.

that would be sweet do you have a parts list i could use lol if you do pm it too me and i will take a look thanks

[Mischief]

Anyone got any links to the smd capacitors I don't want to buy the wrong ones, Cheers

[Helder]

www.taydaelectronics.com has 90% of the SMD stuff you need, the 10uf 0805 SMD ceramic capacitor you can get anywhere like ebay,mouser,digikey,,etc just be sure it 6.3v or higher.

[Mischief]

http://www.taydaelectronics.com has 90% of the SMD stuff you need, the 10uf 0805 SMD ceramic capacitor you can get anywhere like ebay,mouser,digikey,,etc just be sure it 6.3v or higher.

The 10uf is the issue as the ones on ebay show different voltage types, just want to make sure I'm getting the right parts. Don't want to blow anything

[username 123]

Im trying to get the parts ordered for the smd board. Can someone confirm that i got the right parts selected? Also, I cant seem to find the 10uf 0805 on tayda.

270ohm 0805
http://www.taydaelectronics.com/50-x-sm ... -0805.html

150ohm 0805
http://www.taydaelectronics.com/50-x-sm ... -0805.html

33nf 0805
http://www.taydaelectronics.com/33nf-50 ... citor.html

Need a little help looking for the 10uf 0805 on that site.

[Helder]

Those are correct and like I posted above you need to use ebay or one of the other places mentioned to get the 10uf caps.