[PREORDER] Game Boy Cart Micro SD Card Boards
Re: [PREORDER] Game Boy Cart Micro SD Card Boards
I received mine too! It look very beautiful, I'll check the updates for an eventually problem.
Thanks for the works!
Thanks for the works!
-
- Posts: 279
- Joined: Fri May 06, 2016 5:36 pm
- Has thanked: 16 times
- Been thanked: 229 times
Re: [PREORDER] Game Boy Cart Micro SD Card Boards
OK folks,
I went back and looked at the picture that Cannikin sent me and noticed another major issue. So the boards may work as is. Please try them. The additional filtering may not be needed. you do however need to completely remove the card edge connector from the gameboy board. there are lots of things on that board that can and will interfere with the SD card working. I know I show in my picture it still soldered to the board. This was just to have a nice picture to show you where to solder it. I will add a note to the post with the wiring diagram.
I went back and looked at the picture that Cannikin sent me and noticed another major issue. So the boards may work as is. Please try them. The additional filtering may not be needed. you do however need to completely remove the card edge connector from the gameboy board. there are lots of things on that board that can and will interfere with the SD card working. I know I show in my picture it still soldered to the board. This was just to have a nice picture to show you where to solder it. I will add a note to the post with the wiring diagram.
-
- Posts: 263
- Joined: Sun May 22, 2016 6:22 am
- Location: France
- Has thanked: 137 times
- Been thanked: 37 times
Re: [PREORDER] Game Boy Cart Micro SD Card Boards
Sorry but with my poor english level I've not understood the problem.
Haven't received my board yet, I hope for today or tomorrow.
Can someone give me a simple explanation of what is wrong with those boards and what to do to solve that please ?
Haven't received my board yet, I hope for today or tomorrow.
Can someone give me a simple explanation of what is wrong with those boards and what to do to solve that please ?
-
- Posts: 279
- Joined: Fri May 06, 2016 5:36 pm
- Has thanked: 16 times
- Been thanked: 229 times
Re: [PREORDER] Game Boy Cart Micro SD Card Boards
There may be nothing wrong with them. The only person who has tried the board had the connector still soldered to the game boy board. Until someone tries it with the connector removed , we do not know. I have however, spent some time working with my high speed data guru and come up with some filtering that should solve any issues that might arise and improve over all signal integrity. You should get yours soon. One of the French buyers reported getting his board already.SidSilver wrote:Sorry but with my poor english level I've not understood the problem.
Haven't received my board yet, I hope for today or tomorrow.
Can someone give me a simple explanation of what is wrong with those boards and what to do to solve that please ?
-
- Posts: 263
- Joined: Sun May 22, 2016 6:22 am
- Location: France
- Has thanked: 137 times
- Been thanked: 37 times
Re: [PREORDER] Game Boy Cart Micro SD Card Boards
Received mine today, it looks great !
Cannot test it for the moment, I miss the cartridge reader.
Cannot test it for the moment, I miss the cartridge reader.
- Rod2D2
- Posts: 131
- Joined: Thu May 05, 2016 5:08 am
- Location: USA
- Has thanked: 80 times
- Been thanked: 17 times
Re: [PREORDER] Game Boy Cart Micro SD Card Boards
@prerunnerseth Do you know if this works properly yet? I have not been able to test yet and want to make sure it works without issues before I begin working on this part of the project. I will be connecting it to the original DMG pin connectorprerunnerseth wrote:There may be nothing wrong with them. The only person who has tried the board had the connector still soldered to the game boy board. Until someone tries it with the connector removed , we do not know. I have however, spent some time working with my high speed data guru and come up with some filtering that should solve any issues that might arise and improve over all signal integrity. You should get yours soon. One of the French buyers reported getting his board already.SidSilver wrote:Sorry but with my poor english level I've not understood the problem.
Haven't received my board yet, I hope for today or tomorrow.
Can someone give me a simple explanation of what is wrong with those boards and what to do to solve that please ?
-
- Posts: 279
- Joined: Fri May 06, 2016 5:36 pm
- Has thanked: 16 times
- Been thanked: 229 times
Re: [PREORDER] Game Boy Cart Micro SD Card Boards
I'm waiting for someone to try.Rod2D2 wrote:@prerunnerseth Do you know if this works properly yet? I have not been able to test yet and want to make sure it works without issues before I begin working on this part of the project. I will be connecting it to the original DMG pin connectorprerunnerseth wrote:There may be nothing wrong with them. The only person who has tried the board had the connector still soldered to the game boy board. Until someone tries it with the connector removed , we do not know. I have however, spent some time working with my high speed data guru and come up with some filtering that should solve any issues that might arise and improve over all signal integrity. You should get yours soon. One of the French buyers reported getting his board already.SidSilver wrote:Sorry but with my poor english level I've not understood the problem.
Haven't received my board yet, I hope for today or tomorrow.
Can someone give me a simple explanation of what is wrong with those boards and what to do to solve that please ?
-
- Posts: 279
- Joined: Fri May 06, 2016 5:36 pm
- Has thanked: 16 times
- Been thanked: 229 times
Re: [PREORDER] Game Boy Cart Micro SD Card Boards
Looks like i can get my manufacturing costs down on these to be able to offer these again. Testing is in progress on filtering to make these super reliable. Stay Tuned.
-
- Posts: 1
- Joined: Mon Jun 13, 2016 10:11 pm
Who is online
Users browsing this forum: No registered users and 1 guest