[For Sale] GBZ All In One PCB (Pre Orders V2)Sold Out!

[Helder]

Anyone has suggestion for the potentiometer we can use for the amplifier. I know it's 5pin but how much kiloOhm? Is 10k enough?

Thanks
Thanos

I just measured the original GB version and it's 10k. I bought some on ebay :
http://www.ebay.com/itm/2-10K-Ohm-Thumb ... Swqu9VRHcN


I'll likely have a guide up tomorrow for people who want to reprogram their boards through Arduino IDE.

Is there a way to add a second anolog stick?

A whole new redesign of the board and no I don't plan to add another stick.

[tronicgr]

I found this somewhere before ( I had it in my saved photos, Sorry if I cannot give credit for it).

It looks like a 10k might be fine.

dg7EM6q.png (699.69 KiB) Viewed 9118 times

Thanks
Thanos

[day]

I found this somewhere before ( I had it in my saved photos, Sorry if I cannot give credit for it).

It looks like a 10k might be fine.

dg7EM6q.png


Thanks
Thanos

seems to be @a3k4's thanks for sharing, looks good !

[jermzz]

I found this somewhere before ( I had it in my saved photos, Sorry if I cannot give credit for it).

It looks like a 10k might be fine.

dg7EM6q.png


Thanks
Thanos

Thanks for the diagram! Can I ask why we send usb d+ and d- to the sd board?

[hueblo]

I found this somewhere before ( I had it in my saved photos, Sorry if I cannot give credit for it).

It looks like a 10k might be fine.

dg7EM6q.png


Thanks
Thanos

Thanks for the diagram! Can I ask why we send usb d+ and d- to the sd board?

That is an old diagram. Make sure you use the new one, the old one had wrong connections to the power board as well which can damage something. Updated link below.

http://www.sudomod.com/forum/viewtopic.php?f=9&t=1014

[a3k4]

I found this somewhere before ( I had it in my saved photos, Sorry if I cannot give credit for it).

It looks like a 10k might be fine.

dg7EM6q.png


Thanks
Thanos

Thanks for the diagram! Can I ask why we send usb d+ and d- to the sd board?

That is an old diagram. Make sure you use the new one, the old one had wrong connections to the power board as well which can damage something. Updated link below.

http://www.sudomod.com/forum/viewtopic.php?f=9&t=1014

Was just about to post the same thing. @jermzz, @day, @tronicgr please use the new diagram! This older version could short your entire system.

The USB d+ d- to SD card is incorrect, please see the updated diagram

[HoolyHoo]

Thanks for the diagram! Can I ask why we send usb d+ and d- to the sd board?

That is an old diagram. Make sure you use the new one, the old one had wrong connections to the power board as well which can damage something. Updated link below.

http://www.sudomod.com/forum/viewtopic.php?f=9&t=1014

Was just about to post the same thing. @jermzz, @day, @tronicgr please use the new diagram! This older version could short your entire system.

The USB d+ d- to SD card is incorrect, please see the updated diagram

Also, I believe Helder said that the speaker and headphone output is wrong in this diagram.

[Bendra]

That is an old diagram. Make sure you use the new one, the old one had wrong connections to the power board as well which can damage something. Updated link below.

http://www.sudomod.com/forum/viewtopic.php?f=9&t=1014

Was just about to post the same thing. @jermzz, @day, @tronicgr please use the new diagram! This older version could short your entire system.

The USB d+ d- to SD card is incorrect, please see the updated diagram

Also, I believe Helder said that the speaker and headphone output is wrong in this diagram.

In the old one or even in version 2?

[HoolyHoo]

Was just about to post the same thing. @jermzz, @day, @tronicgr please use the new diagram! This older version could short your entire system.

The USB d+ d- to SD card is incorrect, please see the updated diagram

Also, I believe Helder said that the speaker and headphone output is wrong in this diagram.

In the old one or even in version 2?

Both

[HoolyHoo]

Also, I believe Helder said that the speaker and headphone output is wrong in this diagram.

In the old one or even in version 2?

Both

Seems like you should at least double your order for those boards. There is a german facebook community that just heard of your board. 400 potential customers

I had no idea the demand for these so I will likely do another preorder after this batch.

So much amazing ! great job !
But too late for me
When will the next preorder will ocur ? I love to get 2 of this from france !
Do you have any Breadboard in fritzing or something else ?
Thank
Evilz

I plan to have 30+ more after I receive the new and correct chips early next week so keep an eye on the thread or wait till 3rd batch.

Here is a wiring diagram made with Fritzing for my board BUT the speaker output is wrong
http://www.sudomod.com/forum/viewtopic.php?f=9&t=1014
it should be like the image below for Speaker output and Headphone connections.