Page 1 of 3
[WANTED] JP2 connector that fits the Powerboost battery port
Posted: Mon May 23, 2016 12:04 pm
by Popcorn
Looking to trade or buy at least 1 and up to a max of 3 of these JP2 connectors. I have lots of component parts I could offer for trade or buy if it's cheap. PM me?
Re: [WANTED] JP2 connector that fits the Powerboost battery port
Posted: Mon May 23, 2016 12:37 pm
by Fleder
Same here, i've got one, but it does not fit the PowerBoost 1000 Charger.
I would love to trade or buy one, that fits. Can't seem to find the right one anywhere.
Re: [WANTED] JP2 connector that fits the Powerboost battery port
Posted: Sat May 28, 2016 11:42 pm
by Kilren
Popcorn wrote:Looking to trade or buy at least 1 and up to a max of 3 of these JP2 connectors. I have lots of component parts I could offer for trade or buy if it's cheap. PM me?
I haven't tried these, so I can't vouch for them. But you should only be needing 2-ph JST mini micro's.
These have the male and female, so if they're off even by 1mm, you can bend the terminals slightly and solder them on the PB1000c
Amazon JST
Re: [WANTED] JP2 connector that fits the Powerboost battery port
Posted: Sat May 28, 2016 11:48 pm
by jlane52641
I've got 50 coming from china should be here in the next couple days
- 2.0_2PIN_120MM_1_zpsluphuymt.jpg (93.19 KiB) Viewed 12517 times
happy to send out to anyone who covers shipping
the description is: Mini Micro JST 2.0 PH 2-Pin Connector plug with Wires Cables
I guessed hoping they are correct but won't know for sure til I get them in my hands
Re: [WANTED] JP2 connector that fits the Powerboost battery port
Posted: Sun May 29, 2016 12:29 am
by Thijs852
- image.jpeg (1.84 MiB) Viewed 12511 times
I have two sizez bigger ones and smaller one, also have some with no wire attached. If you need them pm me! I haven't got my powerboost yet so i won't be able to test them, but you can send me te size so I can measure them
Re: [WANTED] JP2 connector that fits the Powerboost battery port
Posted: Sun May 29, 2016 1:26 am
by yves1984
jlane52641 wrote:I've got 50 coming from china should be here in the next couple days2.0_2PIN_120MM_1_zpsluphuymt.jpg
happy to send out to anyone who covers shipping
the description is: Mini Micro JST 2.0 PH 2-Pin Connector plug with Wires Cables
I guessed hoping they are correct but won't know for sure til I get them in my hands
I order the same one from Aliexpress
Re: [WANTED] JP2 connector that fits the Powerboost battery port
Posted: Sun May 29, 2016 3:17 am
by Fleder
@Thijs852 & jlane52641
Thank you, if you can confirmt that they are fitting the adafruit powerboost, i would gladly order 2 or 3 of them.
Thanks for sharing!
Re: [WANTED] JP2 connector that fits the Powerboost battery port
Posted: Sun May 29, 2016 3:38 am
by Thijs852
Fleder wrote:@Thijs852 & jlane52641
Thank you, if you can confirmt that they are fitting the adafruit powerboost, i would gladly order 2 or 3 of them.
Thanks for sharing!
Do you have the adafruit powerboost? If so can you tell me what size the jsy connector is?
Re: [WANTED] JP2 connector that fits the Powerboost battery port
Posted: Sun May 29, 2016 5:43 am
by Fleder
Thijs852 wrote:Do you have the adafruit powerboost? If so can you tell me what size the jsy connector is?
Yeah, sure.
It looks like there is space for a connector that is
4,5mm wide and 3,5mm high, without this little nub in the middle.
[spoiler="picture"]
[/spoiler]
Re: [WANTED] JP2 connector that fits the Powerboost battery port
Posted: Sun May 29, 2016 11:17 am
by Thijs852
Fleder wrote:
Yeah, sure.
It looks like there is space for a connector that is
4,5mm wide and 3,5mm high, without this little nub in the middle.
Well, turns out I have the right ones, I have 20 to 30 to spare. So if you need them contact me!