sudomod

Hello All!!!
I have made a very simple PCB which means that you don't have to solder a switch or faf around when prototyping. The way it works on the V1.1 is so that it has 2 header pins which are connected to 2 pads on where the switch goes. These are also good if you are making your own board and want to be able to change the switch easily using the 2 holes. These will cost £4 for 3 with switches and pins already soldered and £3.75 without pins already soldered. Shipping is free in the UK, any other countries, message me and I will see what I can do!
Many Thanks,
Any Problems feel more than welcome to shoot me a PM.

Do you have an already built prototype to show us what exactly this PCB does and how it is useful (and not redundant in anyway)?

ProfessorZ wrote: ↑

Wed Apr 11, 2018 2:10 am

Hello All!!!
I have made a very simple PCB which means that you don't have to solder a switch or faf around when prototyping. The way it works on the V1.1 is so that it has 2 header pins which are connected to 2 pads on where the switch goes. These are also good if you are making your own board and want to be able to change the switch easily using the 2 holes. These will cost £4 for 2 with switches and pins already soldered and £3.75 without pins already soldered. Shipping is free in the UK, any other countries, message me and I will see what I can do!
Many Thanks,
Any Problems feel more than welcome to shoot me a PM.

good luck with the pre-order....


but i dont why you just didnt share this via oshpark....

for something as small as this it would only cost a few $ with free shipping (and your giving back to the community)
(and theres no stress/fear of people making money of this, its not a really sought after item like an AIO)
(and saves the long windedness of people ordering from you)....

but good luck anyway....


.

Majeye wrote: ↑

Wed Apr 11, 2018 6:36 am

Do you have an already built prototype to show us what exactly this PCB does and how it is useful (and not redundant in anyway)?

Hi!
I am just waiting for v1.1 to arrive I have v1.0 that I can send a picture of. It is mainly for people to prototype without having to solder anything as v1.1 has header pins. Another way it would be useful is if people added 2 pads to their board instead of doing the soldering for the switch. This way, if the switch snaps or they want to add a different type of switch (more boards coming soon) they just have to de-solder the 2 holes instead of 3 tiny pins.

Thanks so much for your enquiry and if you have any other questions or concerns, feel free to contact me!