[For Sale] Micro SD Card Cart board with Advanced Filtering

[alien0matic]

Since the hacky cartridge mod isn't working at all for me I want one of yours when they are available again.

[BadBert]

Any idea when these will be back in stock??

[Lanceomni]

Which pins do I need to wire to when using this board (on the cartridge reader)? I was gonna get a jump on it before it arrives.

[prerunnerseth]

Which pins do I need to wire to when using this board (on the cartridge reader)? I was gonna get a jump on it before it arrives.

Here is the wiring connections. I labeled them with the pad number to connect them to on the RPi Zero. They were designed to be in the same order as the pads on the RPi Zero as well. The spares are for anything you want. I plan on wiring the activity LED to one of the spares so i can have it in the SD card. Each of the main pins for the SD card is connected to two pins on the card edge to get the impedance down.

YOU MUST REMOVE THE CONNECTOR FROM THE BOARD. CONNECTOR SHOWN STILL SOLDERED TO THE BOARD FOR REFERENCE ONLY

[prerunnerseth]

These are expected to be in this by thursday. Ill keep you guy updated.

[dboSS]

Can I solder the wires directly to the back of the board, or I must detach the board from the pin?

[Lanceomni]

Do I need to solder across both pins for each of the Pi connections? Or will one of the two be fine?

[prerunnerseth]

Can I solder the wires directly to the back of the board, or I must detach the board from the pin?

You must remove the connector from the board. there is stuff on that board that will mess up signals if you keep it soldered on.

Do I need to solder across both pins for each of the Pi connections? Or will one of the two be fine?

No, You can use just one pin.

[prerunnerseth]

These are coming in tomorrow. I will try my hardest to get them sent out tomorrow as well. Ill let you guys know if they make it out tomorrow.

Thanks,

PRS

[Quatrerwin]

Hoping mine comes in by Thursday (Friday at the absolute latest) of next week before I go on vacation! Depending on what state these will be sent from, I may be willing to pay more for shipping to ensure that I get it before I leave my home for a while if that's okay with you.