sudomod

I'm selling my minty pi kit. I've been having problems with it and don't have the time/energy/skills to figure out how to fix it. Known issues are the pi overheats when plugged into wall power, and I haven't gotten it to boot from battery successfully. I'm asking $125 US + shipping to US only (sorry battery laws.) Also includes an extra battery. Tin is wintergreen and pre-cut. Clear stuff on the back of the screen holder is hot glue, I can remove it if you want (but it gave me better adhesion than the plain plastic did).

Here's a breakdown of costs:

Helder's PCB kit- $90
Helder's custom battery x2 - $20
RPi0w- $10
Custom multicolor 3d printed parts: $45
Flexible TPU sleeve: $15
USB-C cable- $5
Wermy's silicone buttons: $8
Screws: $3
Total: $196

Is the connector on the controller PCB melted? Is there tape on it?

I sent you a PM.

I didn't get one.

Prob because he sent it to the OP?

Can we get better pictures of the power board? I have a suspicion of what is wrong but can't tell in your photos.

Oh yeah. Duh. Didn't notice it wasn't him. Lol

Yeah the connector on the back of the PCB is melted a little, the first pi I used was broken so I had to use a heat gun to take it off which unfortunately melted the plastic a little. The connector still fits and I checked with the multi meter, it still makes connection

Can you take a picture of the other connector?

Dropped price from $150 to $125