CSL Board Setup lower battery auto safeshutdown

[linuxgb]

hi kite
how to setup CSL Board Setup Lower battery auto safe shutdown the system?
thx

[kite]

Hi, on all products with a physical power 'switch' the auto-shutdown can never work because while the switch is 'on' the system will remain powered. This is why it doesn't shutdown by itself. Instead, it's up to the user to flip the switch when the bar is low/empty holding the MODE button you can see the battery voltage. Pretty much 3.3v or lower is like 0% and you should shutdown right now, 3.4v is again really low and it will only have about 5mins left

[linuxgb]

Hi, on all products with a physical power 'switch' the auto-shutdown can never work because while the switch is 'on' the system will remain powered. This is why it doesn't shutdown by itself. Instead, it's up to the user to flip the switch when the bar is low/empty holding the MODE button you can see the battery voltage. Pretty much 3.3v or lower is like 0% and you should shutdown right now, 3.4v is again really low and it will only have about 5mins left

thx for you reply
i means when battery lower then the system auto safe shutdown but the power is on it,it must use the switch to shutdown the hardware
the board can do this?
thx again