Constant "Up" Input

Cooper270987
Posts: 55
Joined: Sat Aug 19, 2017 8:59 am
Has thanked: 12 times
Been thanked: 13 times

Re: Constant "Up" Input

Post by Cooper270987 » Wed May 09, 2018 6:15 am

Thanks Kite. That’s the main reason I posted my workaround, so you knew of the issue. I know sometimes the workaround solution helps you better identify the problem. At some point I want to add the volume wheel back board and reading on the git hub I notice you have to use the analogue calibration to set it up and didn’t know if me removing the analogue stick code would cause a problem with that.

User avatar
kite
Posts: 972
Joined: Thu May 12, 2016 4:30 am
Location: UK
Has thanked: 246 times
Been thanked: 361 times
Contact:

Re: Constant "Up" Input

Post by kite » Wed May 09, 2018 6:48 am

As long as that #define ANALOG_VO.. line is there, it'll work fine :) those defines complete enable/disable the features, so removing the joystick ones will completely remove the joysticks so the issue won't come back. I have plans to be able to make these changes without needing to flash the arduino, just need a bit more free time to actually implement it ;)

Thanks for the feedback btw, all this stuff is really helpful :) hope you enjoy
Stock clearance - CLOSED: viewtopic.php?f=38&t=12064
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/


ImageImageImageImageImage

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest