***** might have done got it... sorry.
Looks like alcohol was the solution...
cleaned all the contacts and we look 100% better
**********
So my screen has a yellow tinge to it in certain screens and some horizontal banding issues very similar to the issue I see on the cm3 sword.
My eyes aren’t the best but I can not (at least easily) see any bridges on the ribbon connector on the board.
Any ideas to help me out?
Thanks!
** edit
Now I can not get a pic of it.... will look more in a bit sorry at work and break time is over
Love the product Kite!!! Cheers and I will try to get you better info when I can.
Thanks
(Probably resolved) Yellow tint and banding on screen sword lite
-
- Posts: 5
- Joined: Thu Dec 14, 2017 1:02 pm
(Probably resolved) Yellow tint and banding on screen sword lite
Last edited by Tomatopaste on Sun Oct 14, 2018 8:05 pm, edited 2 times in total.
-
- Posts: 5
- Joined: Thu Dec 14, 2017 1:02 pm
Re: Yellow, artifacting screen sword lite
Here are a couple shots...
The menu is static so it’s eaiser to get a clean pic.
The menu is static so it’s eaiser to get a clean pic.
- Attachments
-
- CEA0133D-E849-4AA3-8FB9-61131939F264.jpeg (3.25 MiB) Viewed 2766 times
-
- 5E7342C6-4FA3-4578-8E5A-9A0898994160.jpeg (4.2 MiB) Viewed 2766 times
-
- Posts: 5
- Joined: Thu Dec 14, 2017 1:02 pm
Re: Yellow tint and banding on screen sword lite
Are there any troubleshooting steps you would like me to make Kite?
I can try to flux it and tap with a soldering iron like in the video in your troubleshooting guide I just don’t want to make it worse and have no further recourse.
Thanks.
I can try to flux it and tap with a soldering iron like in the video in your troubleshooting guide I just don’t want to make it worse and have no further recourse.
Thanks.
- kite
- Posts: 972
- Joined: Thu May 12, 2016 4:30 am
- Location: UK
- Has thanked: 246 times
- Been thanked: 361 times
- Contact:
Re: (Probably resolved) Yellow tint and banding on screen sword lite
If you have some steps then please feel free to edit the wiki where appropriate, I do check what gets changed from time to time so i can correct it so don't worry There is a section for LCD troubleshooting so perhaps there? https://github.com/kiteretro/Circuit-Sw ... leshooting
Stock clearance - CLOSED: viewtopic.php?f=38&t=12064
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
Who is online
Users browsing this forum: No registered users and 1 guest