Hey guys!
I am currently building my Gameboy Zero with a SAIO V 0.6C and i ran into a problem, while doing a test run.
I have tested the SAIO and the Pi Zero individually and both worked fine. I soldered it on using the tutorial and it seems like something went wrong. The Leds on the SAIO power up, but the USB hub is not, therefore i believe that is the reason, why the Pi Zero is not indicating that it is on. Can you see mistakes i did in the provided pictures? I tried soldering the ground similar to another guide, but that did not fix my problem.
SAIO when powererd on (USB indicator not on):
Pi Zero no power indication
-
- Posts: 8
- Joined: Tue May 30, 2017 9:02 am
- Has thanked: 1 time
- Been thanked: 2 times
- kite
- Posts: 972
- Joined: Thu May 12, 2016 4:30 am
- Location: UK
- Has thanked: 246 times
- Been thanked: 361 times
- Contact:
Re: Pi Zero no power indication
Try putting the SD into the Pi itself if it will fit and see if it boots. If it does, then it's the SD pads that need a little rework
Stock clearance - CLOSED: viewtopic.php?f=38&t=12064
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
Kite's Mailing List: https://goo.gl/forms/e97uUvPOfUxPWdz82
Kite's FAQ: https://kiteretro.com/faq/
-
- Posts: 8
- Joined: Tue May 30, 2017 9:02 am
- Has thanked: 1 time
- Been thanked: 2 times
Re: Pi Zero no power indication
That was our problem! We will fix this in the coming week and continue this great project. Thank you!
Who is online
Users browsing this forum: No registered users and 1 guest