sudomod

I've been trying to get this working for a while and I've also checked my wiring, everything checks out,

I've got one working and it works when I use jstest /dev/input/js0 but the second one get nothing, is there anything else I need to do to get the second one working?

I did also go through the steps on here https://github.com/kiteretro/Circuit-Sw ... -Sword-FAQ

Thanks,

Can you show the output of the configuration.py command? When run normally or just pressing ENTER it will show the config. Also the wiring of how you have connected it

I can't seem to find the configuration.py I tried pressing enter and that didn't work.. Mind telling me the path of this file and I'll copy it?

It's part of the steps you would have to follow to enable it, which are here at the link you provided: https://github.com/kiteretro/Circuit-Sw ... -joysticks

My bad!

Here is the config (attatched)

Also here's the wiring.. https://drive.google.com/file/d/14r56QV ... -M9s-/view

My camera can't focus but its wired like the other one I have in there and that's working fine

Ah, i have a feeling you have hit an issue that was on the early boards the issue is that the Arduino code had a bug that didn't enable joystick 2! I only just remembered about it now based on some of the output of that command not coming back correctly (older firmware).

Could you please follow these steps to get it updated: https://github.com/kiteretro/Circuit-Sw ... controller

Thanks Kite that worked perfectly! Thanks for the support I really appreciate it!