Page 1 of 1
CSL Board Setup lower battery auto safeshutdown
Posted: Tue Feb 11, 2020 9:54 pm
by linuxgb
hi kite
how to setup CSL Board Setup Lower battery auto safe shutdown the system?
thx
Re: CSL Board Setup lower battery auto safeshutdown
Posted: Wed Feb 12, 2020 3:27 am
by kite
Hi, on all products with a physical power 'switch' the auto-shutdown can never work because while the switch is 'on' the system will remain powered. This is why it doesn't shutdown by itself. Instead, it's up to the user to flip the switch when the bar is low/empty
holding the MODE button you can see the battery voltage. Pretty much 3.3v or lower is like 0% and you should shutdown right now, 3.4v is again really low and it will only have about 5mins left
Re: CSL Board Setup lower battery auto safeshutdown
Posted: Wed Feb 12, 2020 6:26 am
by linuxgb
kite wrote: ↑Wed Feb 12, 2020 3:27 am
Hi, on all products with a physical power 'switch' the auto-shutdown can never work because while the switch is 'on' the system will remain powered. This is why it doesn't shutdown by itself. Instead, it's up to the user to flip the switch when the bar is low/empty
holding the MODE button you can see the battery voltage. Pretty much 3.3v or lower is like 0% and you should shutdown right now, 3.4v is again really low and it will only have about 5mins left
thx for you reply
i means when battery lower then the system auto safe shutdown but the power is on it,it must use the switch to shutdown the hardware
the board can do this?
thx again