I'm using the LQ35NC111. My config.txt has this at the end:
Code: Select all
dpi_output_format=458775
hdmi_timings=320 1 20 30 38 240 0 4 3 15 0 0 0 60 0 4608000 1
enable_dpi_lcd=1
display_default_lcd=1
dtparam=i2c_arm=off
dtparam=spi=off
Code: Select all
dpi_output_format=458775
hdmi_timings=320 1 20 30 38 240 0 4 3 15 0 0 0 60 0 4608000 1
enable_dpi_lcd=1
display_default_lcd=1
dtparam=i2c_arm=off
dtparam=spi=off
Hi, kite used exact this screen in his custom board. Please try his settings https://github.com/kiteretro/Super-AIO/ ... config.txtSushi wrote: ↑Sat Feb 10, 2018 3:15 pmI'm trying out a DPI setup on my pi. The problem is that my screen only shows white. I've used the screen's datasheet to setup the DPI timings and made sure it's been wired properly. Has anybody else experienced anything like this? Were you able to fix it?
I'm using the LQ35NC111. My config.txt has this at the end:Code: Select all
dpi_output_format=458775 hdmi_timings=320 1 20 30 38 240 0 4 3 15 0 0 0 60 0 4608000 1 enable_dpi_lcd=1 display_default_lcd=1 dtparam=i2c_arm=off dtparam=spi=off
Users browsing this forum: No registered users and 1 guest