Re: My start button is not working
Posted: Sat Nov 18, 2017 10:27 am
I will try that
sudomod
(Solved) My start button is not working
Page 2 of 2
Re: My start button is not working
Posted: Sat Nov 18, 2017 10:35 am
It is working so far, thank you very much
[SOLVED] Re: My start button is not working
Posted: Sat Nov 18, 2017 10:37 am
Awesome, I'm marking this thread as solved. Please let me know if the issue pops up again.
Re: (Solved) My start button is not working
Posted: Sat Nov 18, 2017 10:45 am
Re: (Solved) My start button is not working
Posted: Sat Nov 18, 2017 11:36 am
EDIT. clearly missed the last few posts where you said it was working. My post is now irrelevant haha.
Worst case, if re flowing does not help, you can also try to run a small wire from the start gpio to the start test pad.
Re flowing the solder should be sufficient.
Worst case, if re flowing does not help, you can also try to run a small wire from the start gpio to the start test pad.
Re flowing the solder should be sufficient.
Re: (Solved) My start button is not working
Posted: Tue Jul 10, 2018 3:45 pm
and what about if the button is all the time connected to ground? used my multimeter between gpio (start button) and ground and they are shortened... I decided to take an other gpio (27) and make a new connection between 27 and start on the motherboard (changing the retrogame.cfg as well) but it also did not work... the start and the ground are also connected on the motherboard... the funny thing is that the button was working before, it just stoped working a couple of days ago