L1,2/R1,2 bracket for CSO Button Board

Share your STL files, CAD design files, etc. here!
kubino
Posts: 207
Joined: Tue Mar 14, 2017 9:03 am
Has thanked: 55 times
Been thanked: 141 times

L1,2/R1,2 bracket for CSO Button Board

Post by kubino » Thu Mar 01, 2018 3:09 pm

Another design by me. This time for Kite's CSO universal Button Board.
kite_backboard_4x.png
kite_backboard_4x.png (352.38 KiB) Viewed 3108 times
You need to solder 6x6x8 tactile buttons:
Button BoardShow
P_20180301_175241.jpg
P_20180301_175241.jpg (1.2 MiB) Viewed 3108 times
And drill 4 holes to back of the case. Holes in bracket should match desired location for back case so you can use it as drill template (untested, I drill holes by CNC :-) ). Tactile buttons caps were used, just search A101 on Aliexpress maybe you can find them on eBay too.
BracketShow
STLs.png
STLs.png (31.13 KiB) Viewed 3108 times
P_20180301_175216.jpg
P_20180301_175216.jpg (2.17 MiB) Viewed 3108 times
P_20180301_223602.jpg
P_20180301_223602.jpg (1.27 MiB) Viewed 3108 times
DownloadShow
4x_ButtonBoard_CSO_top.stl
(23.52 KiB) Downloaded 88 times
4x_ButtonBoard_CSO.stl
(44.42 KiB) Downloaded 88 times
Last edited by kubino on Fri Mar 02, 2018 1:24 pm, edited 3 times in total.

User avatar
kite
Posts: 1770
Joined: Thu May 12, 2016 4:30 am
Location: UK
Has thanked: 390 times
Been thanked: 2153 times
Contact:

Re: L1,2/R1,2 bracket for CSO Button Board

Post by kite » Thu Mar 01, 2018 3:41 pm

Great! Do you have a link to those caps? "A101" on ali didn't show anything :|

kubino
Posts: 207
Joined: Tue Mar 14, 2017 9:03 am
Has thanked: 55 times
Been thanked: 141 times

Re: L1,2/R1,2 bracket for CSO Button Board

Post by kubino » Thu Mar 01, 2018 3:48 pm

kite wrote:
Thu Mar 01, 2018 3:41 pm
Great! Do you have a link to those caps? "A101" on ali didn't show anything :|
Sure. Here you go :-)

https://www.aliexpress.com/item/50PCS-r ... 0.0.zufOrC

EriolGaurhoth
Posts: 13
Joined: Mon Oct 16, 2017 3:07 pm
Has thanked: 14 times
Been thanked: 1 time

Re: L1,2/R1,2 bracket for CSO Button Board

Post by EriolGaurhoth » Fri Mar 02, 2018 3:29 pm

Kubino, you are awesome! Thanks for sharing these files, these are the missing pieces for my build :)

User avatar
mrdude42
Posts: 99
Joined: Sun May 15, 2016 10:04 am
Location: New York City
Has thanked: 300 times
Been thanked: 29 times
Contact:

Re: L1,2/R1,2 bracket for CSO Button Board

Post by mrdude42 » Wed Mar 07, 2018 8:34 am

I wonder if these caps and switches from Amazon would work: http://amzn.to/2oQqxmC

I know you said you used 6mm x 6mm x 8mm switches but the closest thing I could find on amazon are 6 x 6 x 9mm switches and caps. Also coming from amazon would be so much quicker than from China.

kubino
Posts: 207
Joined: Tue Mar 14, 2017 9:03 am
Has thanked: 55 times
Been thanked: 141 times

Re: L1,2/R1,2 bracket for CSO Button Board

Post by kubino » Wed Mar 07, 2018 8:44 am

mrdude42 wrote:
Wed Mar 07, 2018 8:34 am
I wonder if these caps and switches from Amazon would work: http://amzn.to/2oQqxmC

I know you said you used 6mm x 6mm x 8mm switches but the closest thing I could find on amazon are 6 x 6 x 9mm switches and caps. Also coming from amazon would be so much quicker than from China.
It should work fine, but not a big fan of this solution. These caps hase no counter part which "holds" in case. You might have issue with not sticking caps in future.

User avatar
mrdude42
Posts: 99
Joined: Sun May 15, 2016 10:04 am
Location: New York City
Has thanked: 300 times
Been thanked: 29 times
Contact:

Re: L1,2/R1,2 bracket for CSO Button Board

Post by mrdude42 » Thu Mar 08, 2018 2:33 pm

kubino wrote:
Wed Mar 07, 2018 8:44 am
mrdude42 wrote:
Wed Mar 07, 2018 8:34 am
I wonder if these caps and switches from Amazon would work: http://amzn.to/2oQqxmC

I know you said you used 6mm x 6mm x 8mm switches but the closest thing I could find on amazon are 6 x 6 x 9mm switches and caps. Also coming from amazon would be so much quicker than from China.
It should work fine, but not a big fan of this solution. These caps hase no counter part which "holds" in case. You might have issue with not sticking caps in future.
Ahhhh. Good point. The search for the perfect buttons continues... I wonder if it would work if I tried using glue to keep the button on the switches?

umbynos95
Posts: 11
Joined: Tue Mar 07, 2017 1:14 am
Has thanked: 13 times

Re: L1,2/R1,2 bracket for CSO Button Board

Post by umbynos95 » Tue Mar 13, 2018 12:25 pm

Hello guys! It's possible to use silicone dip switch (8*8*5mm) like these with this bracket? http://s.aliexpress.com/VrYzI3iQ?fromSns=Copy
Maybe with 3d printed caps? What do you think?

User avatar
kite
Posts: 1770
Joined: Thu May 12, 2016 4:30 am
Location: UK
Has thanked: 390 times
Been thanked: 2153 times
Contact:

Re: L1,2/R1,2 bracket for CSO Button Board

Post by kite » Tue Mar 13, 2018 1:51 pm

umbynos95 wrote:
Tue Mar 13, 2018 12:25 pm
Hello guys! It's possible to use silicone dip switch (8*8*5mm) like these with this bracket? http://s.aliexpress.com/VrYzI3iQ?fromSns=Copy
Maybe with 3d printed caps? What do you think?
Yes! :D Only with the ones coming with the new order (preorder #5) I modified the design to take those soft buttons (only 2x of them though).. but still kept everything else :)

umbynos95
Posts: 11
Joined: Tue Mar 07, 2017 1:14 am
Has thanked: 13 times

Re: L1,2/R1,2 bracket for CSO Button Board

Post by umbynos95 » Tue Mar 13, 2018 2:00 pm

kite wrote:
Tue Mar 13, 2018 1:51 pm
Yes! :D Only with the ones coming with the new order (preorder #5) I modified the design to take those soft buttons (only 2x of them though).. but still kept everything else :)
Oh.. :cry: I have the one coming with preorder #4.. So it's not possible?

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest