Page 2 of 3

Re: L1,2/R1,2 bracket for CSO Button Board

Posted: Tue Mar 13, 2018 2:06 pm
by HoolyHoo
umbynos95 wrote:
Tue Mar 13, 2018 2:00 pm
kite wrote:
Tue Mar 13, 2018 1:51 pm
Yes! :D Only with the ones coming with the new order (preorder #5) I modified the design to take those soft buttons (only 2x of them though).. but still kept everything else :)
Oh.. :cry: I have the one coming with preorder #4.. So it's not possible?
Will have these available very soon :D
65C22681-8FF7-40F9-AF0F-63EFC3327362.jpeg
65C22681-8FF7-40F9-AF0F-63EFC3327362.jpeg (567.65 KiB) Viewed 9303 times

Re: L1,2/R1,2 bracket for CSO Button Board

Posted: Tue Mar 13, 2018 3:27 pm
by kite
There ya go Hoolyhoos improves it as always :) With my older one you could do it with some creative soldering.. with the squishy buttons technically you can just use a 3D printed bracket and wire them manually (if one exists) but something like that with a PCB will make life easier.

Re: L1,2/R1,2 bracket for CSO Button Board

Posted: Wed Mar 14, 2018 1:16 am
by erik_gee
HoolyHoo wrote:
Tue Mar 13, 2018 2:06 pm
umbynos95 wrote:
Tue Mar 13, 2018 2:00 pm
kite wrote:
Tue Mar 13, 2018 1:51 pm
Yes! :D Only with the ones coming with the new order (preorder #5) I modified the design to take those soft buttons (only 2x of them though).. but still kept everything else :)
Oh.. :cry: I have the one coming with preorder #4.. So it's not possible?
Will have these available very soon :D

65C22681-8FF7-40F9-AF0F-63EFC3327362.jpeg
Haha I swear we are always in the same boat. I'm making one identical to this as well. Couldn't figure out how to fit 4 dmg buttons in a row (way too big). Just ordered a bunch of those soft membranes switches last week and made a quick board design similar to this. I'm always on the slow end though 😂😂 looks great 👍

Re: L1,2/R1,2 bracket for CSO Button Board

Posted: Wed Mar 14, 2018 6:21 am
by HoolyHoo
erik_gee wrote:
Wed Mar 14, 2018 1:16 am
HoolyHoo wrote:
Tue Mar 13, 2018 2:06 pm
umbynos95 wrote:
Tue Mar 13, 2018 2:00 pm


Oh.. :cry: I have the one coming with preorder #4.. So it's not possible?
Will have these available very soon :D

65C22681-8FF7-40F9-AF0F-63EFC3327362.jpeg
Haha I swear we are always in the same boat. I'm making one identical to this as well. Couldn't figure out how to fit 4 dmg buttons in a row (way too big). Just ordered a bunch of those soft membranes switches last week and made a quick board design similar to this. I'm always on the slow end though 😂😂 looks great 👍
Yeah 4 dmg caps in a row is too tight in this location which is why I think my Universal PCB is a good AIO for DMG or 12mm caps. This PCB will fit the bill be for those preferring a more discrete, slimmer profile with smaller caps but still want that soft membrane feel. Super easy installation on either one is huge, IMHO :D

Re: L1,2/R1,2 bracket for CSO Button Board

Posted: Wed Mar 14, 2018 11:17 am
by erik_gee
HoolyHoo wrote:
Wed Mar 14, 2018 6:21 am
erik_gee wrote:
Wed Mar 14, 2018 1:16 am
HoolyHoo wrote:
Tue Mar 13, 2018 2:06 pm


Will have these available very soon :D

65C22681-8FF7-40F9-AF0F-63EFC3327362.jpeg
Haha I swear we are always in the same boat. I'm making one identical to this as well. Couldn't figure out how to fit 4 dmg buttons in a row (way too big). Just ordered a bunch of those soft membranes switches last week and made a quick board design similar to this. I'm always on the slow end though 😂😂 looks great 👍
Yeah 4 dmg caps in a row is too tight in this location which is why I think my Universal PCB is a good AIO for DMG or 12mm caps. This PCB will fit the bill be for those preferring a more discrete, slimmer profile with smaller caps but still want that soft membrane feel. Super easy installation on either one is huge, IMHO :D
Yeah I've only ever used the dmg buttons and pads with my designs. Takes up a but more space when you have to have room for all the parts and bracket. Once people started mentioning the soft tactile switches, it opened up more possibilities since they are so much smaller. And don't need to waste space on a rubber pad.

Probably gonna update some of mine to use those now. Thanks to the community for bringing them up, otherwise I wouldn't have seen them haha

Re: L1,2/R1,2 bracket for CSO Button Board

Posted: Tue Mar 20, 2018 9:03 pm
by edwardthehuman
HoolyHoo wrote:
Tue Mar 13, 2018 2:06 pm

Will have these available very soon :D

65C22681-8FF7-40F9-AF0F-63EFC3327362.jpeg
What buttons will those be using?

Do you think this will be a good one for those: https://nl.aliexpress.com/item/50PCS-ro ... 0.0.zufOrC

Re: L1,2/R1,2 bracket for CSO Button Board

Posted: Wed Mar 21, 2018 4:06 am
by HoolyHoo
edwardthehuman wrote:
Tue Mar 20, 2018 9:03 pm
HoolyHoo wrote:
Tue Mar 13, 2018 2:06 pm

Will have these available very soon :D

65C22681-8FF7-40F9-AF0F-63EFC3327362.jpeg
What buttons will those be using?

Do you think this will be a good one for those: https://nl.aliexpress.com/item/50PCS-ro ... 0.0.zufOrC
Yes, those will work with 3d inserts I made for them to get the spacing right.

Re: L1,2/R1,2 bracket for CSO Button Board

Posted: Mon Apr 02, 2018 10:03 am
by Kayumba
Great !
Thank you very much.

Re: L1,2/R1,2 bracket for CSO Button Board

Posted: Sun Jul 29, 2018 5:42 am
by Kayumba
soon available for sale, or?

Re: L1,2/R1,2 bracket for CSO Button Board

Posted: Sun Jul 29, 2018 6:01 am
by HoolyHoo
Kayumba wrote:
Sun Jul 29, 2018 5:42 am
soon available for sale, or?
https://www.sudomod.com/forum/viewtopic.php?f=38&t=5665

;)