Ant's Circuit Sword STL Files (joystick, shoulder button, exhaust fan cartridge)

Share your STL files, CAD design files, etc. here!
sygyzy
Posts: 190
Joined: Tue Sep 05, 2017 12:45 pm
Has thanked: 52 times
Been thanked: 32 times

Re: Kite's Circuit Sword Fan Mount, Joystick, and Back Buttons

Post by sygyzy » Sat Mar 17, 2018 6:18 pm

For your bracket for the rear buttons (2), does it raise the HDMI board high enough to be level or do we still need to solder in the PCB spacers? For example Erik G's bracket takes care of this.

User avatar
AntFJ
Posts: 146
Joined: Thu Nov 16, 2017 8:09 pm
Has thanked: 30 times
Been thanked: 99 times

Re: Kite's Circuit Sword Fan Mount, Joystick, and Back Buttons

Post by AntFJ » Mon Mar 19, 2018 2:05 pm

sygyzy wrote:
Sat Mar 17, 2018 6:18 pm
For your bracket for the rear buttons (2), does it raise the HDMI board high enough to be level or do we still need to solder in the PCB spacers? For example Erik G's bracket takes care of this.
It should be thick enough. I did just realize though that i had the setting checked in cura that builds an extra later between the supports and the model. If you print this and it isn't thick enough let me know and i can give a corrected model.

Bottom Line: no need to solder. That was the whole point

User avatar
sixteenbit
Posts: 51
Joined: Mon Aug 21, 2017 8:42 pm
Has thanked: 18 times
Been thanked: 13 times
Contact:

Re: Kite's Circuit Sword Fan Mount, Joystick, and Back Buttons

Post by sixteenbit » Thu Mar 22, 2018 8:04 am

Is it possible to get "Cart With Fan Vent.stl" without Gameboy Zero on it? I tried removing it but I keep getting fragments. Might be easier if you have it as a separate layer.

Thanks!

User avatar
AntFJ
Posts: 146
Joined: Thu Nov 16, 2017 8:09 pm
Has thanked: 30 times
Been thanked: 99 times

Re: Kite's Circuit Sword Fan Mount, Joystick, and Back Buttons

Post by AntFJ » Thu Mar 22, 2018 8:09 am

Sorry! I modified a shell on thingiverse! Find me a different cart and i can mod it

User avatar
sixteenbit
Posts: 51
Joined: Mon Aug 21, 2017 8:42 pm
Has thanked: 18 times
Been thanked: 13 times
Contact:

Re: Kite's Circuit Sword Fan Mount, Joystick, and Back Buttons

Post by sixteenbit » Thu Mar 22, 2018 8:12 am

AntFJ wrote:
Thu Mar 22, 2018 8:09 am
Sorry! I modified a shell on thingiverse! Find me a different cart and i can mod it
This is the one I normally use which I think is the same thing, just blank.

https://www.thingiverse.com/thing:2745857

User avatar
AntFJ
Posts: 146
Joined: Thu Nov 16, 2017 8:09 pm
Has thanked: 30 times
Been thanked: 99 times

Re: Kite's Circuit Sword Fan Mount, Joystick, and Back Buttons

Post by AntFJ » Thu Mar 22, 2018 10:03 am

Awesome thanks! On second thought. Send me the cart with the text that you want and ill modify that. If you have a CM3 text version that would be awesome

User avatar
sixteenbit
Posts: 51
Joined: Mon Aug 21, 2017 8:42 pm
Has thanked: 18 times
Been thanked: 13 times
Contact:

Re: Kite's Circuit Sword Fan Mount, Joystick, and Back Buttons

Post by sixteenbit » Thu Mar 22, 2018 11:17 am

Honestly I would rather it be blank :)

User avatar
AntFJ
Posts: 146
Joined: Thu Nov 16, 2017 8:09 pm
Has thanked: 30 times
Been thanked: 99 times

Re: Kite's Circuit Sword Fan Mount, Joystick, and Back Buttons

Post by AntFJ » Thu Mar 22, 2018 11:31 am

sixteenbit wrote:
Thu Mar 22, 2018 11:17 am
Honestly I would rather it be blank :)
Easy gimme a couple days

User avatar
erik_gee
Posts: 349
Joined: Thu Jun 16, 2016 12:57 am
Location: United States
Has thanked: 135 times
Been thanked: 187 times

Re: Kite's Circuit Sword Fan Mount, Joystick, and Back Buttons

Post by erik_gee » Fri Mar 23, 2018 4:17 am

AntFJ wrote:
Mon Mar 19, 2018 2:05 pm
sygyzy wrote:
Sat Mar 17, 2018 6:18 pm
For your bracket for the rear buttons (2), does it raise the HDMI board high enough to be level or do we still need to solder in the PCB spacers? For example Erik G's bracket takes care of this.
It should be thick enough. I did just realize though that i had the setting checked in cura that builds an extra later between the supports and the model. If you print this and it isn't thick enough let me know and i can give a corrected model.

Bottom Line: no need to solder. That was the whole point
I'm sure you already got everything figured out. But I found 1.6mm above the screw post was a good height to rest the HDMI board on. The 2mm that the soldered boards add seems slightly too high to me.
Bunch of different shoulder button kits Sales Thread:https://sudomod.com/forum/viewtopic.php ... 192#p63192

AIO board for DMG Sales Thread:
https://sudomod.com/forum/viewtopic.php?f=38&t=6431

6 Button Common Ground Board Sales Thread: https://sudomod.com/forum/viewtopic.php?f=38&t=4811

User avatar
AntFJ
Posts: 146
Joined: Thu Nov 16, 2017 8:09 pm
Has thanked: 30 times
Been thanked: 99 times

Re: Kite's Circuit Sword Fan Mount, Joystick, and Back Buttons

Post by AntFJ » Sun Mar 25, 2018 11:10 pm

sixteenbit wrote:
Thu Mar 22, 2018 11:17 am
Honestly I would rather it be blank :)
See attached for the blank cart
Blank Cart With Fan Vent.stl
(176.84 KiB) Downloaded 188 times

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest