CM3 Circuit Sword Fan Cartridge

Share your STL files, CAD design files, etc. here!
User avatar
HoolyHoo
Posts: 766
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 206 times
Been thanked: 741 times

Re: CM3 Circuit Sword Fan Cartridge

Post by HoolyHoo » Tue Apr 17, 2018 3:06 pm

Astrix wrote:
Tue Apr 17, 2018 2:56 pm
Thanks for the .stl HoolyHoo, it looks great. Will give printing it a go.
Does Kite sell the fan seperately? I got in on the 1st CSO order but the fan was optional. Or does anyone know where I could get one?
He was selling them as an add on. Not sure if he still is. Try emailing him.

User avatar
ViaCard
Posts: 68
Joined: Sun Aug 06, 2017 11:30 am
Location: Zurich, Switzerland
Has thanked: 53 times
Been thanked: 26 times

Re: CM3 Circuit Sword Fan Cartridge

Post by ViaCard » Wed Apr 18, 2018 2:11 am

Thanks HoolyHoo for sharing your design.

It took me more then 5 attempts to print it in a good quality. I'm fresh on 3D printing :lol:

This was my first very ugly (shame on me) print with grey PLA:
SpoilerShow
IMG_7136.jpg
IMG_7136.jpg (95.79 KiB) Viewed 9850 times
and after some slicer settings and cancelled prints later, i got it :D

This time printed with silver PLA:
SpoilerShow
IMG_7138.jpg
IMG_7138.jpg (84.7 KiB) Viewed 9850 times
Here both prints compared:
SpoilerShow
IMG_7140.jpg
IMG_7140.jpg (84.09 KiB) Viewed 9850 times
I donate you something, its not so much but you can go drink a coffe or buy ice cream for your kids :)

User avatar
HoolyHoo
Posts: 766
Joined: Sat Jul 09, 2016 9:34 pm
Has thanked: 206 times
Been thanked: 741 times

Re: CM3 Circuit Sword Fan Cartridge

Post by HoolyHoo » Wed Apr 18, 2018 7:03 am

ViaCard wrote:
Wed Apr 18, 2018 2:11 am
Thanks HoolyHoo for sharing your design.

It took me more then 5 attempts to print it in a good quality. I'm fresh on 3D printing :lol:

This was my first very ugly (shame on me) print with grey PLA:
SpoilerShow
IMG_7136.jpg
and after some slicer settings and cancelled prints later, i got it :D

This time printed with silver PLA:
SpoilerShow
IMG_7138.jpg
Here both prints compared:
SpoilerShow
IMG_7140.jpg
I donate you something, its not so much but you can go drink a coffe or buy ice cream for your kids :)
Thank you!

Yeah, 3D printing just takes a little time to learn the "tricks". Much improved from your first print. :D Hope you enjoy. :D

Jfenton78
Posts: 26
Joined: Thu Aug 24, 2017 7:40 am
Has thanked: 3 times
Been thanked: 1 time

Re: CM3 Circuit Sword Fan Cartridge

Post by Jfenton78 » Sun Apr 29, 2018 7:33 pm

Does anyone have a few pics of the assembly for the power mode switch? I'm a little lost as to what the button support and tab are used for.

jeff

ZahcStarKiller
Posts: 52
Joined: Fri Feb 23, 2018 10:17 pm
Has thanked: 19 times
Been thanked: 26 times

Re: CM3 Circuit Sword Fan Cartridge

Post by ZahcStarKiller » Sun May 06, 2018 5:03 pm

That looks awesome! Does it interfere with the 4 dmg button backboard you sent me? I looked on your Instagram and it looks like it would be a tight fit. I’d really like to grab one of these if it will work with that backboard. Kubino is already cutting my case so I think it is too late to change it up again. Poor guy, I’ve sent him like ten revisions on what I want.

kubino
Posts: 207
Joined: Tue Mar 14, 2017 9:03 am
Has thanked: 54 times
Been thanked: 152 times

Re: CM3 Circuit Sword Fan Cartridge

Post by kubino » Mon May 07, 2018 1:23 am

ZahcStarKiller wrote:
Sun May 06, 2018 5:03 pm
That looks awesome! Does it interfere with the 4 dmg button backboard you sent me? I looked on your Instagram and it looks like it would be a tight fit. I’d really like to grab one of these if it will work with that backboard. Kubino is already cutting my case so I think it is too late to change it up again. Poor guy, I’ve sent him like ten revisions on what I want.
I can still change the back case. Just PM me your decission :D

ZahcStarKiller
Posts: 52
Joined: Fri Feb 23, 2018 10:17 pm
Has thanked: 19 times
Been thanked: 26 times

Re: CM3 Circuit Sword Fan Cartridge

Post by ZahcStarKiller » Mon May 07, 2018 8:09 pm

Thanks kubino! I chatted with HoolyHoo and everything is going to work fine so we are good! No more changes needed!

ZahcStarKiller
Posts: 52
Joined: Fri Feb 23, 2018 10:17 pm
Has thanked: 19 times
Been thanked: 26 times

Re: CM3 Circuit Sword Fan Cartridge

Post by ZahcStarKiller » Mon May 07, 2018 8:18 pm

FYI Everyone, I just uploaded these amazing files that HoolyHoo graciously provided us with to Shapeways ( I have used them EXTENSIVELY for lightsaber chassis parts) and ordered them. They’re being printed with high strength HP Nylon, black for the inside parts, and grey for the cartridge. They use a powder fusion process for those parts so there shouldn’t be any visible print lines (virtually none at least). I am going for a super clean build so I thought I would be the Guinea pig and try it out. That being said, these files look amazing blown up. The detail is astounding. I will post pictures on here when I get the parts in, and test fit them as well. I expect excellence.

For clarification, I uploaded them for myself, so you will not be able to see them on there unless you upload them yourself.

User avatar
JayCanuck
Posts: 19
Joined: Sat May 12, 2018 3:06 am
Has thanked: 71 times
Been thanked: 2 times

Re: CM3 Circuit Sword Fan Cartridge

Post by JayCanuck » Thu May 17, 2018 9:17 pm

ZahcStarKiller, how's the order from Shapeways turn out? Would love to see pics!

ZahcStarKiller
Posts: 52
Joined: Fri Feb 23, 2018 10:17 pm
Has thanked: 19 times
Been thanked: 26 times

Re: CM3 Circuit Sword Fan Cartridge

Post by ZahcStarKiller » Fri May 18, 2018 3:40 am

JayCanuck wrote:
Thu May 17, 2018 9:17 pm
ZahcStarKiller, how's the order from Shapeways turn out? Would love to see pics!
It will be in on Saturday according to the tracking. I will try hard to snap a few pictures before I leave for Mexico on Sunday. Feel free to message me on Saturday to remind me to post pics. I’ve got a big head, and it’s all cobwebs.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest