640x480 LCD bracket with PSP joystick

Share your STL files, CAD design files, etc. here!
Post Reply
timemaster
Posts: 25
Joined: Fri May 05, 2017 1:00 am
Has thanked: 2 times
Been thanked: 5 times

640x480 LCD bracket with PSP joystick

Post by timemaster » Sun Jun 10, 2018 5:51 am

Hello, let me introduce my design of VGA LCD bracket with PSP joystick compatible with Kite's Circuit Sword or Kite's SAIO. This design also allows you to slightly slip LCD inside in "contrast wheel wall" to have a picture more centered. It has been based on Kubino's and Hoolyhoo's great designs, thank you, guys.

Any suggestions or modifications are welcome.

Enjoy!

https://www.thingiverse.com/thing:2954555
Attachments
GBZ-VGA-bracket-v2.stl
(325.57 KiB) Downloaded 23 times
Last edited by timemaster on Fri Sep 21, 2018 2:54 am, edited 2 times in total.

freedomoffunk
Posts: 4
Joined: Mon Jun 11, 2018 3:09 pm
Has thanked: 1 time

Re: 640x480 LCD bracket with PSP joystick

Post by freedomoffunk » Sun Jun 24, 2018 6:29 am

Thanks so much for this. I have just sent it to be printed (nylon print) so will let you know how it turns out.

User avatar
Killar
Posts: 56
Joined: Sat Dec 02, 2017 6:29 am
Has thanked: 19 times
Been thanked: 10 times

Re: 640x480 LCD bracket with PSP joystick

Post by Killar » Wed Jun 27, 2018 4:09 am

How does this fit with the 320x240 LCD that is standard in Kite's new Circuit Sword pre-order?

timemaster
Posts: 25
Joined: Fri May 05, 2017 1:00 am
Has thanked: 2 times
Been thanked: 5 times

Re: 640x480 LCD bracket with PSP joystick

Post by timemaster » Wed Jun 27, 2018 12:21 pm

freedomoffunk wrote:
Sun Jun 24, 2018 6:29 am
Thanks so much for this. I have just sent it to be printed (nylon print) so will let you know how it turns out.
you're welcome, any feedback will be appreciated :)

timemaster
Posts: 25
Joined: Fri May 05, 2017 1:00 am
Has thanked: 2 times
Been thanked: 5 times

Re: 640x480 LCD bracket with PSP joystick

Post by timemaster » Wed Jun 27, 2018 12:22 pm

Killar wrote:
Wed Jun 27, 2018 4:09 am
How does this fit with the 320x240 LCD that is standard in Kite's new Circuit Sword pre-order?
It doesn't fit the 320x240 LCD, this display has ribbon cable on a different place that doesn't fit under this bracket.
Last edited by timemaster on Fri Sep 21, 2018 2:56 am, edited 1 time in total.

reipet
Posts: 80
Joined: Sun Apr 23, 2017 3:52 am
Has thanked: 28 times
Been thanked: 32 times

Re: 640x480 LCD bracket with PSP joystick

Post by reipet » Fri Jul 13, 2018 5:08 am

How big is the hole you need to drill into the front shell for the PSP Joystick to work properly?

User avatar
neolith
Posts: 219
Joined: Mon Apr 24, 2017 12:43 pm
Location: Germany
Has thanked: 120 times
Been thanked: 153 times

Re: 640x480 LCD bracket with PSP joystick

Post by neolith » Sun Aug 05, 2018 9:12 am

reipet wrote:
Fri Jul 13, 2018 5:08 am
How big is the hole you need to drill into the front shell for the PSP Joystick to work properly?
You asked this almost a month ago, but in case you still need an aswer:
Judging from my PSP100 stick I'd say 11.1mm in diameter should let you move the stick freely.
– "The biggest trick the devil ever pulled was convincing the world he didn't exist." –

timemaster
Posts: 25
Joined: Fri May 05, 2017 1:00 am
Has thanked: 2 times
Been thanked: 5 times

Re: 640x480 LCD bracket with PSP joystick

Post by timemaster » Fri Sep 21, 2018 2:54 am

I have updated STL in the first post, this has much better display fit and also there is a lot of space for display to be centered manually instead of fixed position which is not good for Chinese cases and inaccurate wall cuts.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest