Page 1 of 1

Ant's Pocket FE Files

Posted: Thu Apr 04, 2019 2:28 pm
by AntFJ
UPDATE: 7 May - added in back buttons, cart, and back board files

Hey folks - I will be making a full set of 3d printed parts for the galaxy gaming pocket FE. I wanted to get these out to those of you making your own kits ASAP as the supplied STL files from GG just weren't doing it for me.

All of these files fit snugly with my printer/settings. Please let me know if you guys need more clearances set for your machines (or you could just scale up/down the parts as required).

I will be adding more parts as I go... back buttons, cartridge, etc.

Front Buttons (does not need to be glued in):
Pocket FE Top Screen Spacer.stl
(1.45 KiB) Downloaded 54 times
Pocket FE Bottom Screen Spacer.stl
(684 Bytes) Downloaded 51 times
Button Bracket Pocket FE 2 v7.png
Button Bracket Pocket FE 2 v7.png (74.17 KiB) Viewed 894 times
Button Well Pocket FE.stl
(179.28 KiB) Downloaded 49 times
Button Well Drill Guide.stl
(58.38 KiB) Downloaded 49 times

Shoulder Button Drill Guides:
Shoulder Button Drill Guide.stl
(153.7 KiB) Downloaded 27 times
Shoulder Button Drill Guide EXT port side.stl
(254.48 KiB) Downloaded 28 times

Shoulder Button Bracket:
Shoulder Buttons Combined.stl
(227.13 KiB) Downloaded 47 times

Pocket FE Cart With Clearance.stl
(839.05 KiB) Downloaded 30 times

BOARD GERBERs - THESE NEED TO BE 1mm. Recommend buying them from JLPCB or other manufacturer... OSH park only makes 1.6mm boards:
Gerber_Pocket FE R
(10 KiB) Downloaded 19 times
Gerber_Pocket FE L
(13.89 KiB) Downloaded 17 times

Re: Ant's Pocket FE Files

Posted: Thu Apr 04, 2019 2:33 pm
by Ely
Thank you for the Button well file :)

Edit: Perfect fit on my GBP shell with an Ender3

Re: Ant's Pocket FE Files

Posted: Fri Apr 05, 2019 2:37 am
by galaxygaming
Thanks for the contribution!

Re: Ant's Pocket FE Files

Posted: Thu Apr 11, 2019 9:58 am
by AntFJ
Sneak peak of what I've been working on... I'm in the process of making/ordering the boards that will slide in to the brackets. Didn't want to cut the stickers for my shoulder buttons!
Screenshot_20190411-115508_Gallery.jpg (1.54 MiB) Viewed 763 times
Screenshot_20190411-115458_Gallery.jpg (2.2 MiB) Viewed 763 times
Screenshot_20190411-115432_Gallery.jpg (1.55 MiB) Viewed 763 times
Screenshot_20190411-115426_Gallery.jpg (1.57 MiB) Viewed 763 times

Re: Ant's Pocket FE Files

Posted: Sun Apr 14, 2019 3:58 pm
by Ziploc99

So nice. Love the side placement of those shoulder buttons. Awesome work

Re: Ant's Pocket FE Files

Posted: Tue May 07, 2019 9:34 am
by AntFJ
hey folks finished making my files and they seem to work well- i've added them to the first post! Try them out in your build and let me know how it goes!
20190506_194714.jpg (213.32 KiB) Viewed 494 times
20190506_194637.jpg (1.99 MiB) Viewed 494 times
20190506_194258.jpg (2.08 MiB) Viewed 494 times