long story short, (chronicled here - https://www.sudomod.com/forum/viewtopic ... 776#p77842)
My audio doesnt work. I removed and tried to reinstall the audio chips few time and think I ended up lifting pads to the chip.
so my brain thinks I can wire an i2s board to the pi, volume wheel, and (probably skip the head phone jack. I dont use it) then speaker.
am I right? how do I know which gpio pins to use?
I really enjoyed this thing when it worked and I dont know exactly what went wrong to begin with. Help me game again.
Help me salvage this
- Robochris
- Posts: 310
- Joined: Thu Feb 16, 2017 7:49 am
- Location: Ohio
- Has thanked: 82 times
- Been thanked: 41 times
Help me salvage this
"What a horrible night to have a curse."
VMU viewtopic.php?f=62&t=7623
Gbz1 viewtopic.php?f=43&t=2853
Gbz2 viewtopic.php?f=43&t=3174
Gbz3 viewtopic.php?f=43&t=6095&p=62287#p62287
Mintypi viewtopic.php?f=32&t=3580
PocketPi viewtopic.php?f=43&t=8643
VMU viewtopic.php?f=62&t=7623
Gbz1 viewtopic.php?f=43&t=2853
Gbz2 viewtopic.php?f=43&t=3174
Gbz3 viewtopic.php?f=43&t=6095&p=62287#p62287
Mintypi viewtopic.php?f=32&t=3580
PocketPi viewtopic.php?f=43&t=8643
-
- Posts: 3
- Joined: Mon Sep 30, 2019 12:08 pm
- Been thanked: 2 times
Re: Help me salvage this
Hey, before doing anything else I would rule out the volume wheel being the issue using the pin out below by bridging the 2nd and 5th pins and 3rd and 4th pins and then turning it back on and seeing you have audio through the speaker/headphones or both
- Robochris
- Posts: 310
- Joined: Thu Feb 16, 2017 7:49 am
- Location: Ohio
- Has thanked: 82 times
- Been thanked: 41 times
Re: Help me salvage this
No change. Thanks though!HumanGuineaPig wrote: ↑Thu Dec 12, 2019 2:40 pmHey, before doing anything else I would rule out the volume wheel being the issue using the pin out below by bridging the 2nd and 5th pins and 3rd and 4th pins and then turning it back on and seeing you have audio through the speaker/headphones or both
"What a horrible night to have a curse."
VMU viewtopic.php?f=62&t=7623
Gbz1 viewtopic.php?f=43&t=2853
Gbz2 viewtopic.php?f=43&t=3174
Gbz3 viewtopic.php?f=43&t=6095&p=62287#p62287
Mintypi viewtopic.php?f=32&t=3580
PocketPi viewtopic.php?f=43&t=8643
VMU viewtopic.php?f=62&t=7623
Gbz1 viewtopic.php?f=43&t=2853
Gbz2 viewtopic.php?f=43&t=3174
Gbz3 viewtopic.php?f=43&t=6095&p=62287#p62287
Mintypi viewtopic.php?f=32&t=3580
PocketPi viewtopic.php?f=43&t=8643
- Robochris
- Posts: 310
- Joined: Thu Feb 16, 2017 7:49 am
- Location: Ohio
- Has thanked: 82 times
- Been thanked: 41 times
Re: Help me salvage this
Wired up an adafruit i2s board according to this diagram and didnt get anywhere..
Does anyone know the actual gpio pinout of this board??
Does anyone know the actual gpio pinout of this board??
"What a horrible night to have a curse."
VMU viewtopic.php?f=62&t=7623
Gbz1 viewtopic.php?f=43&t=2853
Gbz2 viewtopic.php?f=43&t=3174
Gbz3 viewtopic.php?f=43&t=6095&p=62287#p62287
Mintypi viewtopic.php?f=32&t=3580
PocketPi viewtopic.php?f=43&t=8643
VMU viewtopic.php?f=62&t=7623
Gbz1 viewtopic.php?f=43&t=2853
Gbz2 viewtopic.php?f=43&t=3174
Gbz3 viewtopic.php?f=43&t=6095&p=62287#p62287
Mintypi viewtopic.php?f=32&t=3580
PocketPi viewtopic.php?f=43&t=8643
Who is online
Users browsing this forum: No registered users and 1 guest