(Solved)Board not booting.

Post Reply
User avatar
Robochris
Posts: 310
Joined: Thu Feb 16, 2017 7:49 am
Location: Ohio
Has thanked: 82 times
Been thanked: 41 times

(Solved)Board not booting.

Post by Robochris » Mon Apr 29, 2019 7:00 pm

So I got all the components soldered on. I’ve followed every trace I could find. It seems like the Pi isn’t getting power. I have lights on the charger and on the small board with the switch that come on. I don’t know what to check from here. Also should I be able to detect continuity on both sides of a resistor?

Thoughts?

Edit: I can plug power directly into the Pi and everything seems to work as it should
Last edited by Robochris on Sat May 04, 2019 12:27 pm, edited 1 time in total.

User avatar
KonnorJ
Posts: 385
Joined: Thu Jan 11, 2018 1:23 am
Location: United Kingdom
Has thanked: 58 times
Been thanked: 109 times
Contact:

Re: Board not booting.

Post by KonnorJ » Sat May 04, 2019 9:35 am

Check your pololuand tp4056 are installed correctly

User avatar
Robochris
Posts: 310
Joined: Thu Feb 16, 2017 7:49 am
Location: Ohio
Has thanked: 82 times
Been thanked: 41 times

Re: Board not booting.

Post by Robochris » Sat May 04, 2019 9:47 am

KonnorJ wrote:
Sat May 04, 2019 9:35 am
Check your pololuand tp4056 are installed correctly
I’ll check again but I have reflowed and checked continuity. I’ve tried following the traces from the power pins on the Pi but but end up at the screen or audio circuit.

User avatar
Robochris
Posts: 310
Joined: Thu Feb 16, 2017 7:49 am
Location: Ohio
Has thanked: 82 times
Been thanked: 41 times

Re: (Solved)Board not booting.

Post by Robochris » Sat May 04, 2019 12:28 pm

Reflowed solder for the third time and that seemed to work. Odd because I had continuity on all points. But oh well, it works. Now for my audio problem.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest