sudomod

So I got all the components soldered on. I’ve followed every trace I could find. It seems like the Pi isn’t getting power. I have lights on the charger and on the small board with the switch that come on. I don’t know what to check from here. Also should I be able to detect continuity on both sides of a resistor?

Thoughts?

Edit: I can plug power directly into the Pi and everything seems to work as it should

Check your pololuand tp4056 are installed correctly

KonnorJ wrote: ↑

Sat May 04, 2019 9:35 am

Check your pololuand tp4056 are installed correctly

I’ll check again but I have reflowed and checked continuity. I’ve tried following the traces from the power pins on the Pi but but end up at the screen or audio circuit.

Reflowed solder for the third time and that seemed to work. Odd because I had continuity on all points. But oh well, it works. Now for my audio problem.