How to Program Helder's All in One GBZ PCB with Arduino IDE
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
@Helder Apparently you can use an arduino as an ISP, any chance I can do this instead of buying the programmer?
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
It should work, if it says USBasp in the title it's all good. I ordered my first one as some generic AVR programmer and it didn't work with AVRDude or many known programming apps so I ended up reprogramming it as a USBasp.PotaTox wrote:@Helder Will this USBasp programmer work?
I'm having a hard time, because it always gets out of bootloader mode before it finished uploading. It happens in less than 8 seconds for me.
Indeed you can as I did that for programming that Generic AVR Programmer and it will save you headache.PotaTox wrote:@Helder Apparently you can use an arduino as an ISP, any chance I can do this instead of buying the programmer?
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
So I can burn a bootloader (you said something about putting a different bootloader on the newer boards, so maybe I could use that?), but how do I actually program the ATMega32u4 with Gameboy.ino? I found a guide, but will it work?Helder wrote:Indeed you can as I did that for programming that Generic AVR Programmer and it will save you headache.PotaTox wrote:@Helder Apparently you can use an arduino as an ISP, any chance I can do this instead of buying the programmer?
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
Wait, at the bottom of the Sparkfun guide it talks about uploading code the hard way, and also says you can upload code that way. Tomorrow I will test this, as well as burn on a whole new bootloader just to make sure I didn't screw up the original one. However, @Helder , can you follow up on what you said about putting on a new bootloader onto the new chips? I would really like to just burn on that new bootloader.
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
Tomorrow afternoon I'll have some info for you.PotaTox wrote:Wait, at the bottom of the Sparkfun guide it talks about uploading code the hard way, and also says you can upload code that way. Tomorrow I will test this, as well as burn on a whole new bootloader just to make sure I didn't screw up the original one. However, @Helder , can you follow up on what you said about putting on a new bootloader onto the new chips? I would really like to just burn on that new bootloader.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
Hello again,
My USB programmer arrived today. I have loaded the no analog gameboy sketch and uploaded using programmer option.
It compiled and seems to have transferred ok. I'm not sure what if anything I have to do about the boot loader?
I connected back to the pi
D+ (green) to PP22
D- (white) to PP23
I have an exteral PSU (4 amp) which I have connected to the USB from pi zero +5v and ground and also the pi zero itself PP1 and PP6.
I have clean install of retropie but still can not recognise any controller connected
Maybe this is something to do with bootloader?
My USB programmer arrived today. I have loaded the no analog gameboy sketch and uploaded using programmer option.
It compiled and seems to have transferred ok. I'm not sure what if anything I have to do about the boot loader?
I connected back to the pi
D+ (green) to PP22
D- (white) to PP23
I have an exteral PSU (4 amp) which I have connected to the USB from pi zero +5v and ground and also the pi zero itself PP1 and PP6.
I have clean install of retropie but still can not recognise any controller connected
Maybe this is something to do with bootloader?
---------------------------------------------------------------------------------------------------------------------------------------
[color=#8000BF][b][size=85]https://www. ... b][/color][/size][/size]
[color=#8000BF][b][size=85]https://www. ... b][/color][/size][/size]
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
I'll post a mini guide later and plug the 5v and GND in the same Boxed area that says USB from Pi Zero that has filtering for the power and you want the power as clean as possible, the hubs get filtered 5v from that location.
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
You can also apparently do thisHelder wrote:Tomorrow afternoon I'll have some info for you.PotaTox wrote:Wait, at the bottom of the Sparkfun guide it talks about uploading code the hard way, and also says you can upload code that way. Tomorrow I will test this, as well as burn on a whole new bootloader just to make sure I didn't screw up the original one. However, @Helder , can you follow up on what you said about putting on a new bootloader onto the new chips? I would really like to just burn on that new bootloader.
- Helder
- Trailblazer
- Posts: 2985
- Joined: Thu May 05, 2016 8:33 am
- Location: Rogers, AR
- Has thanked: 1459 times
- Been thanked: 3114 times
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
@PotaTox @SwingeyP
Here is the Guide with USBasp:
http://www.sudomod.com/forum/viewtopic.php?f=25&t=1228
Here is the Guide with USBasp:
http://www.sudomod.com/forum/viewtopic.php?f=25&t=1228
Chat with me and other members On Discord
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Don't contact me about obtaining my board files (as you will not get them). If my Boards or PCB Kits are sold out, they will be restocked as soon as I can get them and there is demand for them. You can join the mailing list on my Website to be notified when they are available.
Helder's Game Tech Website
We will not support any cloned work so don't come to us with technical issues to resolve, go talk to the cloner for help.
Re: How to Program Helder's All in One GBZ PCB with Arduino IDE
I'm sorry @Helder about the constant barrage of posts about this, but I think I found what I will do: http://forum.arduino.cc/index.php/topic ... #msg475663. Does that look okay? I just really don't want to spend more money and have to wait. Also, one more question: I once supplied 5v and ground through the ISP pins when I was first using the all in one, did I fry anything with that?
Who is online
Users browsing this forum: No registered users and 1 guest