it's about 0.89 inTreguard wrote:Please could you do me a favour and measure the diameter of your speaker? Im trying to see if its the same size as the Visatonic one i used aboveABH wrote:I use this Speaker
http://www.ebay.com/itm/321501717358?_t ... EBIDX%3AIT
The sound very high and pure
After i cut speaker edges , and a little of gameboy housing . it's fit perfect with AIO
Better sound, better speaker
- ABH
- Posts: 188
- Joined: Sat May 28, 2016 7:01 pm
- Location: Qatar
- Has thanked: 82 times
- Been thanked: 113 times
Re: Better sound, better speaker
Check out my builds:
GameBoy Pocket RPI3
GameBoy SP
SupaBoy S
BurgerKing Gameboy
GameBoy SP 3A+
Code: Select all
Enjoy your time ..
Re: Better sound, better speaker
Sorry i'm being thick, i meant just the metal chunky part of the speaker on the backABH wrote:it's about 0.89 inTreguard wrote:Please could you do me a favour and measure the diameter of your speaker? Im trying to see if its the same size as the Visatonic one i used aboveABH wrote:I use this Speaker
http://www.ebay.com/itm/321501717358?_t ... EBIDX%3AIT
The sound very high and pure
After i cut speaker edges , and a little of gameboy housing . it's fit perfect with AIO
- ABH
- Posts: 188
- Joined: Sat May 28, 2016 7:01 pm
- Location: Qatar
- Has thanked: 82 times
- Been thanked: 113 times
Re: Better sound, better speaker
Sorry for replaying you lateTreguard wrote:Sorry i'm being thick, i meant just the metal chunky part of the speaker on the backABH wrote:it's about 0.89 inTreguard wrote:
Please could you do me a favour and measure the diameter of your speaker? Im trying to see if its the same size as the Visatonic one i used above
And this is the measurement that you asked for : 0.62 in
Check out my builds:
GameBoy Pocket RPI3
GameBoy SP
SupaBoy S
BurgerKing Gameboy
GameBoy SP 3A+
Code: Select all
Enjoy your time ..
Re: Better sound, better speaker
Is that a v1.4 AIO board in that picture? For some reason i don't see the pins for the joystick. I was considering this speaker but the joystick pins look like they'll cut into the space and make it so the speaker doesn't fit.ABH wrote:Sorry for replaying you late
And this is the measurement that you asked for : 0.62 in
- ABH
- Posts: 188
- Joined: Sat May 28, 2016 7:01 pm
- Location: Qatar
- Has thanked: 82 times
- Been thanked: 113 times
Re: Better sound, better speaker
Yes it's 1.4 AIOGanreizu wrote:Is that a v1.4 AIO board in that picture? For some reason i don't see the pins for the joystick. I was considering this speaker but the joystick pins look like they'll cut into the space and make it so the speaker doesn't fit.ABH wrote:Sorry for replaying you late
And this is the measurement that you asked for : 0.62 in
No It's exist but i put electrical tape on them
Check out my builds:
GameBoy Pocket RPI3
GameBoy SP
SupaBoy S
BurgerKing Gameboy
GameBoy SP 3A+
Code: Select all
Enjoy your time ..
Re: Better sound, better speaker
I'll go and check. Thanks for letting me know The AIO would make things a lot easier tbh; worth the extra cost.ABH wrote:Sorry for replaying you lateTreguard wrote:Sorry i'm being thick, i meant just the metal chunky part of the speaker on the backABH wrote:
it's about 0.89 in
And this is the measurement that you asked for : 0.62 in
Re: Better sound, better speaker
Did you cut out the speaker box on the case or something? Either that or my AIO boards have the joystick pads jutting out more than yours, so i don't think this mod is viable for me.ABH wrote:Yes it's 1.4 AIO
No It's exist but i put electrical tape on them
- ABH
- Posts: 188
- Joined: Sat May 28, 2016 7:01 pm
- Location: Qatar
- Has thanked: 82 times
- Been thanked: 113 times
Re: Better sound, better speaker
All AIO boards are same sizesGanreizu wrote:Did you cut out the speaker box on the case or something? Either that or my AIO boards have the joystick pads jutting out more than yours, so i don't think this mod is viable for me.ABH wrote:Yes it's 1.4 AIO
No It's exist but i put electrical tape on them
Keep trying .
Check out my builds:
GameBoy Pocket RPI3
GameBoy SP
SupaBoy S
BurgerKing Gameboy
GameBoy SP 3A+
Code: Select all
Enjoy your time ..
Re: Better sound, better speaker
I don't understand D:ABH wrote:All AIO boards are same sizes
Keep trying .
FullSizeRender.jpg
The analog stick pads are just way too in the way. I dremeled the case to hell and the speaker as far as i think i'm allowed. (Even more than in the pics)
[spoiler="pics"] [/spoiler]
Who is online
Users browsing this forum: No registered users and 1 guest