LoafSlice GBZ
LoafSlice GBZ
So here's what I have so far.
Original DMG-01 case that I bought from an old vet $20
Screen (I've included photos of the seller and what not) but the screen I got from ATianDirect
Under the BW search.
For a total of $24. The only real problem I've had is that it doesn't match a single board on the forum that I've seen, so now I'm at a loss at what to do.
I wouldn't know how to pin anything to anything
Please send help.
Anyway,
The pizero I got from the UK for $14. It got here in a weeks time from there to Norfolk Virginia.
Got a teensy board for some amount of money that I forget now.
I got the buttons from another Nintendo controller that I dissected and found that I can use these cool buttons but have to just dremmel the bottom catches to match the originals
I've ordered a PCB board from @Hedler
And I'm eagerly awaiting a PCB cartridge board from @prerunnerseth
Other than that. Am I missing anything?
The screen is the biggest hurdle I need help with
I'm also planning on ordering a 3ds slider to add a joystick to the bottom left.
Should be fun.
If anyone could possibly email me for personal help with this. Please please please
12blues@gmail.com
Original DMG-01 case that I bought from an old vet $20
Screen (I've included photos of the seller and what not) but the screen I got from ATianDirect
Under the BW search.
For a total of $24. The only real problem I've had is that it doesn't match a single board on the forum that I've seen, so now I'm at a loss at what to do.
I wouldn't know how to pin anything to anything
Please send help.
Anyway,
The pizero I got from the UK for $14. It got here in a weeks time from there to Norfolk Virginia.
Got a teensy board for some amount of money that I forget now.
I got the buttons from another Nintendo controller that I dissected and found that I can use these cool buttons but have to just dremmel the bottom catches to match the originals
I've ordered a PCB board from @Hedler
And I'm eagerly awaiting a PCB cartridge board from @prerunnerseth
Other than that. Am I missing anything?
The screen is the biggest hurdle I need help with
I'm also planning on ordering a 3ds slider to add a joystick to the bottom left.
Should be fun.
If anyone could possibly email me for personal help with this. Please please please
12blues@gmail.com
- Attachments
-
- image.png (137.22 KiB) Viewed 11207 times
-
- image.jpeg (1.55 MiB) Viewed 11207 times
-
- image.jpeg (1.44 MiB) Viewed 11207 times
-
- image.jpeg (1.77 MiB) Viewed 11207 times
-
- image.jpeg (1.87 MiB) Viewed 11207 times
-
- image.jpeg (1.53 MiB) Viewed 11207 times
-
- image.jpeg (1.86 MiB) Viewed 11207 times
-
- image.jpeg (1.78 MiB) Viewed 11207 times
-
- image.jpeg (1.75 MiB) Viewed 11207 times
-
- Posts: 279
- Joined: Fri May 06, 2016 5:36 pm
- Has thanked: 16 times
- Been thanked: 229 times
Re: LoafSlice GBZ
Update.
Its been a bit, but Ive had to wait for mail to arrive and what not.
Its been a bit, but Ive had to wait for mail to arrive and what not.
- Attachments
-
- This lame screen came in and didnt even fit inside my DMG, LUCKILY I was able to take the Tactile keys off the board. SCORE
- IMG_3219.JPG (1.75 MiB) Viewed 10982 times
Re: LoafSlice GBZ
another update
- Attachments
-
- IT TOOK me 2 days to get this off, My suggestion is to get a vacuum solder thing and the braid. Youre never going to know which will work for you, I ended up using a combo of both for various things
- IMG_3359.JPG (1.38 MiB) Viewed 10980 times
-
- IM really excited about using the original buttons for the back buttons. They feel nice and the bumper pads just looks like i would destroy the GB
- IMG_3358.JPG (1.3 MiB) Viewed 10980 times
-
- I got the actual screen @wermy got from gigaparts.com great find and I didnt have to screw around on amazon
- IMG_3355.JPG (1.31 MiB) Viewed 10980 times
-
- CLEAR BUTTONS FOR DAYS
- IMG_3364.JPG (1.48 MiB) Viewed 10980 times
-
- Heres KitchBent's cartridge board. Woohoo. This will make it even more of a breeze of a build. Im really liking the clear thing as you can tell
- IMG_3354.JPG (1.54 MiB) Viewed 10980 times
-
- Little view of my set up on my coffee table
- IMG_3353.JPG (1.12 MiB) Viewed 10980 times
-
- Close up of my INSANE soldering skills
- IMG_3352.JPG (1.17 MiB) Viewed 10980 times
-
- I was going to use this wire, but it ended up being to thin and soldering it was a pain. sooooo nope
- IMG_3290.JPG (1.47 MiB) Viewed 10980 times
-
- I ordered some clear buttons for the front and decided that Im going to use the buttons with the tactile buttons for the L & R buttons in the back
- IMG_3349.JPG (1 MiB) Viewed 10980 times
-
- Almost have everything I need.
- FullSizeRender 8.jpg (1.82 MiB) Viewed 10980 times
Re: LoafSlice GBZ
LoafSlice wrote:I've been on the fence about it.
But I finally drilled the holes for my back buttons
That looks awesome! How does it look on inside?
Re: LoafSlice GBZ
davidn wrote:LoafSlice wrote:I've been on the fence about it.
But I finally drilled the holes for my back buttons
That looks awesome! How does it look on inside?
- Attachments
-
- image.jpeg (1.15 MiB) Viewed 10887 times
-
- image.jpeg (1.29 MiB) Viewed 10887 times
-
- image.jpeg (1.45 MiB) Viewed 10887 times
- Fleder
- Posts: 849
- Joined: Thu May 05, 2016 9:04 am
- Location: Germany
- Has thanked: 183 times
- Been thanked: 258 times
Re: LoafSlice GBZ
Back button covers is indeed a nice idea !
I'm currious to see how you will fix the switches to the case, but I'm sure you'll come with something great
I'm currious to see how you will fix the switches to the case, but I'm sure you'll come with something great
Who is online
Users browsing this forum: No registered users and 1 guest