[For Sale, Preorder] DMG pre-cut cases

[kubino]

SuperAIO LEDs in action :
https://youtu.be/aZr3-uMiO0I

PS: Ignore the light tube's I have ordered other ones. They are just for tests.

[dryja123]

ok 1st post updated with list of members who contacted me. Please check if I write the info correctly. Hope I havent forgot anybody

I'm there! Please send me a PM when you're ready to go.

[exoboy]

Would like a grey one with kite SuperAIO USB and X/Y holes. Unsure about LED holes - in the example pic they're much larger than I would like.

[ABH]

Great job .. so clean

[jsawhite]

if you're still taking reservations, I'd be interested in a black one. Using Kite's SAIO (second gen), so usb and led holes would be great!

[kubino]

Would like a grey one with kite SuperAIO USB and X/Y holes. Unsure about LED holes - in the example pic they're much larger than I would like.

ok, will put you in a list. The holes in picture are 3mm, but I can do 1.2mm radius or even smaller.

[Johnny sublime]

Could you make the recess around the x y buttons like on the a b buttons

[kubino]

Could you make the recess around the x y buttons like on the a b buttons

maybe, but I'd rather not doing it because as the plastic between X/Y is quite thin.

[dryja123]

I'm going to be using HoolyHoo's SAIO screen bracket with button wells, printed by HoolyHoo. Do you know if the button hole alignment will match exactly to HoolyHoo's bracket? If the measurements are off slightly I'll have to cut the bracket.

[kubino]

I'm going to be using HoolyHoo's SAIO screen bracket with button wells, printed by HoolyHoo. Do you know if the button hole alignment will match exactly to HoolyHoo's bracket? If the measurements are off slightly I'll have to cut the bracket.

I think it looks pretty close

SAIO_Hoolyhoo.png (84.26 KiB) Viewed 7448 times